user manual

Expanding 190

PC CardPC Card

PC Card

The PC card interface accepts type I and type II cards. TypeIPC

cards are used for storage of files and additional applications.

Type II PC cards can be used for additional hardware - modems

for instance.

The PC card slot is located on the right hand side below the pen

holder. If no card is fitted to the slot, a ‘blank’ is fitted to stop the

ingress of foreign objects. Before plugging a device into the PC

card interface, you must first eject the ‘blank’ card.

To do this, hinge the PC card eject button out from the case until

pointing straight out and push it in. The card will then be ejected.

Withdraw this completely and insert your new device. The card

should be inserted face up and pushed in until flush with the

casing. The PC card eject button should be folded away to

prevent accidental removal.

If the device is a Memory Card, it will be added as a new drive

and can be accessed in the System screen. If the new card is a

device such as a modem, the type needs to be set in the

Modems entry of the Control Panel.

For additional information, refer to:

\extras\support\netBook\hardware.pdf on the CD.

Hinge outHinge out

Hinge out

the PC Cardthe PC Card

the PC Card

eject buttoneject button

eject button

ressress

ress

button tobutton to

button to

eject cardeject card

eject card