User manual

Modular Matrix Switcher 8x8 (with Audio)
PTN Electronics Limited 18 www.PTN-electronics.com
EDIDM[X]B[Y].
Manually EDID switching. Enable input [Y] to
learn the EDID data of output[X]. If there is
problem learning the EDID data, it will
automatically set the default EDID data for input
[Y].
USER/[Y]/[X]:*****;
Custom command for signal cards, [Y]=I/O; [X]=
port number; *****: User-definable command,
e.g. 0623%
0911%. Restore factory default.
Commands for Signal Cards
4I-VA
USER/I/[x]:0622%;
Set the signal of input channel [x] to VGA.
USER/I/[x]:0623%;
Set the signal of input channel [x] to YCBCR.
USER/I/[x]:0624%;
Set the signal of input channel [x] to SVIDEO.
USER/I/[x]:0625%;
Set the signal of input channel [x] to CVIDEO.
USER/I/[x]:0626%;
Set the resolution of input [x] to
1024x768@60Hz.
USER/I/[x]:0627%;
Set the resolution of input [x] to
1280X720@60Hz.
USER/I/[x]:0628%;
Set the resolution of input [x] to
1280X800@60Hz.
USER/I/[x]:0619%;
Set the resolution of input [x] to
1360X768@60Hz.
USER/I/[x]:0621%;
Set the resolution of input [x] to
1600X1200@60Hz.
USER/I/[x]:0629%;
Set the resolution of input [x] to
1920X1080@60Hz.
USER/I/[x]:0620%;
Set the resolution of input [x] to
1920X1200@60Hz.
USER/I/[x]:0617%;
Restore to factory default.
USER/I/[x]:0606%;
Auto-adjust VGA signal
USER/I/[x]:0698%;
Update software
4I-VG
USER/I/[x]:0698%;
Update software
USER/I/[x]:0622%;
Set the signal of input channel [x] to VGA.
USER/I/[x]:0623%;
Set the signal of input channel [x] to YCBCR.
USER/I/[x]:0624%;
Set the signal of input channel [x] to SVIDEO.
USER/I/[x]:0625%;
Set the signal of input channel [x] to CVIDEO.