User manual

Modular Matrix Switcher 8x8 (with Audio)

PTN Electronics Limited 23 www.PTN-electronics.com

Step1. Connect the TCP/IP port of the MMX88A to Ethernet port of PC with twisted

pair.

Step2. Set the PC’s IP address and gateway to the same IP section as the MMX88A.

Do please remember the PC’s original IP address and gateway.

Step3. Set the MMX88A’s IP address and gateway to the same IP section as the

router.

Step4. Set the PC’s IP address and gateway as the original one.

Step5. Connect the MMX88A and PC(s) to the router. In the same LAN, each PC is

able to control the MMX88A asynchronously.

4.4.2. TCP/IP Settings

Step1. Connect the TCP/IP port of the MMX88A to Ethernet port of PC with twisted

pair.

Step2. Set the PC’s IP and gateway to the same IP section as the default IP of the

MMX88A (192.168.0.178).

Step3. Enter the http://192.168.0.178:100 to the Internet Explorer, you will see the

Step4. Enter user name “admin” and password “admin”, then press the Enter button.

(Not the Enter key on your keyboard.) Then you can enter the configuration

page to configure the IP port, including the IP reset, Serial reset and password

reset etc. As picture below: