User Manual SC51T PTN Compact Scaler Switcher All Rights Reserved Version: SC51T (with PoC)_2014V1.5 www.PTN-electronics.
Compact Scaler Switcher (with PoC) SAFETY PRECAUTIONS To insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. Unpack the equipment carefully and save the original box and packing material for possible future shipment Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
Compact Scaler Switcher (with PoC) NOTICE: 1. Please read this user manual carefully before using this product. 2. The item PoC is short for Power over Cable, and when the power adapter is connecting with TPHD402PR, SC51T can’t be energized through PoC. 3. The receiver works with SC51T can only be TPHD402PR. 4. The item “far-end” means the device (e.g. display device, 3 party RS232 device etc) connected with TPHD402PR. 5. Take notice to 4.6 Instructions of VGA Converting Cable when using. 6.
Compact Scaler Switcher (with PoC) Contents 1. Introduction .................................................................................................................1 1.1 Introduction to SC51T ........................................................................................ 1 1.2 Features ............................................................................................................ 1 1.3 Package Contents ..........................................................................
Compact Scaler Switcher (with PoC) 4.5.1 Option ....................................................................................................25 4.5.2 Picture ...................................................................................................27 4.5.3 Sound ....................................................................................................27 4.5.4 Setup .....................................................................................................28 4.
Compact Scaler Switcher (with PoC) 1. Introduction 1.1 Introduction to SC51T SC51T is a compact mini scaler switcher with 5 video inputs (3 HDMI, 2 VGA) and 6 audio inputs (3 HDMI audio & 2 VGA audio: switched following the video; 1 MIC audio input). As the VGA input supports VGA, YPbPr and C-video, so the scaler switcher is compliant with multiple video signals.
Compact Scaler Switcher (with PoC) 1 x IR emitter 2 x VGA to YPbPr cables 2 x RS232 cable 8 x Plastic cushions 1 x IR remote (Cell battery is not included) 1 x Power Adapter (DC 12V) 1 x User Manual Notes：Please confirm if the product and the accessories are all included, if not, please contact with the dealers. 2. Product Appearance 2.1 SC51T Front Panel ① Power indicator Illuminate red when power on, turn green in standby mode.
Compact Scaler Switcher (with PoC) LCD screen and RS232 control software will prompt “Not support!”. ④ ENTER Confirm selection in menu. ⑤ RESO/AUTO Used as output resolution manual switching button, select among 1920x1200, 1920x1080, 1600x1200, 1360x768, 1280x800, 1280x720, 1024x768. Used as output resolution switching mode selection button, press and hold for 7 seconds or more to enter in Auto-switching mode, press and hold for 7 seconds or more again to enter in Manual-switching mode.
Compact Scaler Switcher (with PoC) 2.2 SC51T Rear Panel ① AUDIO INPUT Including 3 HDMI audio & 2 VGA audio inputs User can choose any one audio (embedded HDMI audio or external input audio) for HDMI audio input by sending RS232 commands. ② AUDIO OUTPUT Audio output port, the audio comes from the input audio corresponding to the selected video source and mixed with MIC audio.
Compact Scaler Switcher (with PoC) Including 3 levels: 48V phantom power mode (connect with condenser microphone), MIC mode (connect with dynamic microphone) and LINE mode (connect with wireless microphone or line audio). ⑨ VIDEO INPUT Video input ports, include 3 HDMI inputs & 2 VGA inputs. VGA ports support YPbPr, C-video and VGA format. Factory default is VGA format. ⑩ OUTPUT c) HDMI local output d) HDBaseT output, support PoC.
Compact Scaler Switcher (with PoC) 3.3 Connection Procedure Step1. Connect HDMI source devices (e.g. Blue-ray DVD) to HDMI input ports of SC51T with HDMI cable. Connect VGA source devices (e.g. PC) to VGA input ports of SC51T with VGA cable. Step2. Connect audio sources to corresponding AUDIO INPUT ports on SC51T with audio cable. The audio of HDMI can be embedded or external by sending the right command. Step3. Connect a HDMI display device to HDMI output port of SC51T with HDMI cable. Step4.
Compact Scaler Switcher (with PoC) and “ ” to ground. MIC input MIC input has a low frequency characteristics, and wide frequency response. When switch to “MIC”, the microphone input is used for connecting with dynamic microphone. There are two different connection methods: 1) Unbalanced connection: “+” and “ ” connect to ground, and “-” connects to signal. “-” and “ ” connect to ground, and “+” connects to signal.
Compact Scaler Switcher (with PoC) When switch to “LINE”, the microphone input is used for connecting with line audio or wireless microphone output. There are two different connection methods: 1) Unbalanced connection: “+” and “ ” connect to ground, and “-” connects to signal. “-” and “ ” connect to ground, and “+” connects to signal. 2) Balanced connection: “+” connects to positive, “-” connects to negative and “ connects to ground. ” 3.
Compact Scaler Switcher (with PoC) 1. In auto-adjusting mode, SC51T will choose the resolution of the display device at the far-end as the preferred resolution. If you need to choose the resolution of local HDMI display device: Cut off the power of SC51T and disconnect SC51T and TPHD402PR. Turn on the power of SC51T. Gets the resolution of local HDMI output device. Connect TPHD402PR to SC51T. 2.
Compact Scaler Switcher (with PoC) enter in Auto-switching mode. Operation Examples: Connect INPUT 2, INPUT 4, and INPUT 5 ports with source devices, select INPUT 4 to outputs. Press and hold for the front key SOURCE/AUTO for 7 seconds or more to enter in auto-switching mode. No signal removing or new input, SC51T just works in auto-switching mode, and take no action (Output from INPUT 4) Connect INPUT 3 with a source device, and then it will choose INPUT 3 to output.
Compact Scaler Switcher (with PoC) 4.2 Operations of IR 4.2.1 IR Remote As IR signal can be transmitted bi-directionally between SC51T and TPHD402PR, it is able to use the IR remote at the far-end to control SC51T or HDMI source devices (via CEC function buttons). ① Standby button Enter/ exit standby mode ② Input channel selection buttons INPUT 1 is for HDMI1, INPUT 2 for HDMI2…INPUT 5 for VGA2. AUTO: Enable/disable auto-switching mode.
4K HDBaseT Splitter 1x4 with PoC 4.2.2 IR Operations The 5 IR OUT ports correspond to the 5 video inputs separately, and the IR signals are switched following the corresponding video source. 1) Control far-end device from local Control SC51T or far-end display device from local through corresponding IR remote. 2) Control local device from remote Control SC51T or local device from local through corresponding IR remote. PTN Electronics Limited 12 www.PTN-electronics.
Compact Scaler Switcher (with PoC) 4.3 Operations of CEC Function SC51T supports CEC, it can be turned on/ off by sending RS232 commands or OSD menu operations. The default setting is ON. Commands pertaining to CEC: “50686%” (enable CEC) and “50687%” (disable CEC) HDMI INPUT ports 1~3 support CEC, if the connected source devices also support CEC and their CEC are on, users can control the source device via the IR remote of SC51T.
Compact Scaler Switcher (with PoC) CEC: Control HDMI source devices by IR remote of SC51T 4.4 Operations of RS232 Control As RS232 can be transmitted bi-directionally between SC51T and TPHD402PR, so it is able to control a third party RS232 device from local or control SC51T from remote. When to control a third party RS232 device, the baud rate of this device should be 2400, 4800, 9600, 19200, 38400, 57600 or 115200. 4.4.
Compact Scaler Switcher (with PoC) Parameter Configuration area Monitoring area, indicates if the command sent works. Command Sending area Please set the parameters of COM number, bound rate, data bit, stop bit and the parity bit correctly, and then you are able to send command in Command Sending Area. PTN Electronics Limited 15 www.PTN-electronics.
Compact Scaler Switcher (with PoC) 4.4.
Compact Scaler Switcher (with PoC) Command Function Feedback Example Mic precedence: XXXX (XXXX= 50696% Check Mic precedence status 50724% MIC volume up MIC Volume: xx (xx=0~60) 50725% MIC volume down MIC Volume: xx (xx=0~60) 508xx% Set MIC volume MIC Volume: xx (xx=0~60) 50706% 50707% 50708% 50709% 50710% 50711% Choose embedded audio as HDMI 1 audio input Choose external audio as HDMI 1 audio input Choose embedded audio as HDMI 2 audio input Choose external audio as HDMI 2 audio input C
Compact Scaler Switcher (with PoC) Command 50621% Function Feedback Example Change the resolution to1600X1200 UXGA Resolution: 1600x1200 Setup Commands 50604% Lock the front panel buttons Front Panel lock 50605% Unlock the front panel buttons Front Panel Unlock 501xx% Set the volume to xx. LINE Volume: xx (xx=0~60) 502xx% Set the brightness to xx. Brightness: xx (xx=0~99) 503xx% Set the contrast to xx. Contrast: xx (xx=0~99) 504xx% Set the saturation to xx.
Compact Scaler Switcher (with PoC) Command Function Feedback Example 50761% Not display mute icon of LINE audio LINE Mute Icon: disable 50762% Display mute icon of LINE audio LINE Mute Icon: enable 50763% Not display mute icon of MIC audio MIC Mute Icon: disable 50764% Display mute icon of MIC audio MIC Mute Icon: enable 50765% Display freeze icon Freeze Icon: enable 50766% Not display freeze icon Freeze Icon: disable 50644% Display channel status Input Icon: enable 50645% Not displ
Compact Scaler Switcher (with PoC) Command Function Feedback Example Manage HDMI input with EDID management, copy the best 50782% resolution data of one output to HDMI input prefered timing timing table=[1] Resolution:1920x1080 Enable serial control mode 1: control RS232 Mode 1: RS232 Control Scaler & far-end from local RS232 Scaler & Remote Enable serial control mode 2: control RS232 Mode 2: RS232 & Scaler from local RS232 and far-end) Remote Control Scaler 50697% Exit standby mode Wake up!
Compact Scaler Switcher (with PoC) Command Function 50633% Check the image mode 50634% Check the audio mode Feedback Example Picture Mode: xx (xx= Dynamic/ Standard/ Mild/ User) Sound Mode: xx (xx= Standard/ Music/ Movie/ Sports/ User) Aspect Ratio: xx (xx= 16:9/ 4:3/ auto/ panorama/ justscan/ 50635% Check the image aspect ratio zoom1/ zoom2, when the input source is VGA format, xx can only be 4:3, 16:9 or Panorama) 50636% Check the brightness Brightness: xx (xx=0~99) 50637% Check the contrast
Compact Scaler Switcher (with PoC) Command Function Feedback Example on/off, Manual/ Auto-switching modes Source:XXXX Resolution:XXXX Digital Sound Ouput: XXXX Switch status: XXXX Adjustment Commands 50678% Enable screen output adjusting Enter Output Position Adjust 50679% Disable screen output adjusting Exit Output Position Adjust 50670% Move the image to left Output Position Adjust X xx 50671% Move the image to right Output Position Adjust X xx 50672% Move the image up Output Position A
Compact Scaler Switcher (with PoC) Command 50911% Function Feedback Example Exit command CEC cmd: exit Note: 1. Turn on/ off HDCP auto-management by sending serial commands. a) When HDCP is set to active, whether output source is with HDCP depends on input source. If the input source is with HDCP, so is the output and vice versa. 2. When HDCP is set to Manual, whether the output is with HDCP depends on the statue of HDCP. Turn off HDCP, then the output is without HDCP and vice versa. 3.
Compact Scaler Switcher (with PoC) Control SC51T or 3rd party device from local 4.4.5 Control SC51T from Local or Remote Control SC51T from local Firstly, connect the RS232 port of SC51T to RS232 port of PC. Secondly, send command 50788% via RS232 communication software. Lastly, send the right command to control SC51T. Connect as below: Control SC51T from local Control SC51T from remote PTN Electronics Limited 24 www.PTN-electronics.
Compact Scaler Switcher (with PoC) Firstly, connect the RS232 port of far-end RS232 device to RS232 port of PC. Secondly, send command 50788% via RS232 communication software. Lastly, send the right command to control SC51T. Connect as below: Control SC51T from remote 4.5 Operations in OSD Menu SC51T provides a powerful OSD operation menu, contains 4 parts: optional settings, image settings, audio settings and system setting etc.
Compact Scaler Switcher (with PoC) Output Adjust: Adjust output image position (X: horizontal direction and Y: vertical direction) and ratio aspect (width and height). Input4 Select: Select video source format for VGA input, includes AV 1 (C-video signal), VGA 1 (VGA signal) and YPbPr 1 (Component video signal). Use ENTER button to select the desired source format. Input5 Select: Select video source for VGA input, includes AV 2 (C-video signal), VGA 2 (VGA signal) and YPbPr 2 (Component video signal).
Compact Scaler Switcher (with PoC) 4.5.2 Picture Including Picture Mode, Color Temperature, Aspect Ratio, Noise Reduction, Screen and Color Range. Please check the picture below: Picture mode: Includes Dynamic, Standard, Mild, and User. And only in User mode, it is able to set the image contrast and brightness. Color Temperature: Includes Cool, Medium, Warm and User. And only in User mode, it is able to set values for Red, Green and Blue (RGB).
Compact Scaler Switcher (with PoC) Sound mode: Includes Standard, Music, Movie, Sports and User. Only User mode supports to set treble and bass. Surround Sound: Includes Off, Surround and SRS Trusurround XT. EQ: To adjust the sound balance. 4.5.4 Setup Including OSD Language, Restore Factory Default, Blending, HDMI CEC, OSD Duration and version inquiry PTN Electronics Limited 28 www.PTN-electronics.
Compact Scaler Switcher (with PoC) OSD Language: Supports 14 languages, including English (default), Chinese etc. Restore Factory Default: Restores to original system state Blending: Includes Low, Middle, High and Off. Use ENTER button to select. HDMI CEC: Enable/disable CEC and auto-standby function. Default: CEC on, STANDBY on. OSD Duration: Includes 5 s, 10 s, 15 s and Off. “s” is for Second. VERSION: Displays software version 4.
Compact Scaler Switcher (with PoC) Connect with Composite Video (C-VIDEO) Source A. Operation Examples: 1. Via front panel buttons & OSD Press MENU button on front panel to enter in OSD, and then enter in OPTION setting menu: set “INPUT 4 Select” to AV1, and “INPUT 5 Select” to AV2. After setting, press SOURCE/AUTO button on front panel to switch to AV1 or AV2 source. 2. Via RS232 commands Send command 50682% (or 50685%) to switch to YPbPr1 (or YPbPr2) source. 3.
Compact Scaler Switcher (with PoC) 1024x768 Maximum Pixel Clock Gain HDCP Audio Input Input Input Connector Input Impedance Audio General Frequency Response Video Impedance Input / Output 0dB Level Compliant with DVI & HDMI 1.3 standards Audio output 3 Dual-mono stereo audio for HDMI 2 Dual-mono stereo Output audio for VGA (Support C-VIDEO, YPbPr, VGA) Output 3P captive (3.
Compact Scaler Switcher (with PoC) 6. Panel Drawing 7. Troubleshooting & Maintenance Problems Causes Solutions Output image with snowflake Bad quality of the Try another high quality connecting cable cable. Fail or loose connection Make sure the connection is good No signal at the input / output end Check with oscilloscope or multimeter if there is any signal at the input/ output end.
Compact Scaler Switcher (with PoC) POWER indicator doesn’t work or no respond to any operation Fail connection of power cord. Make sure the power cord connection is good. EDID management does not work normally The HDMI cable is broken at the output end. Change for another HDMI cable which is in good working condition. There is a blank screen on the display when switching The display does not support the resolution of the video source. Switch again.
Compact Scaler Switcher (with PoC) 8. After-sales Service If there appear some problems when running SC51T, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty. 1) Product Limited Warranty: PTN warrants that its products will be free from defects in materials and workmanship for three years, which starts from the first day you buy this product (The purchase invoice shall prevail).
www.PTN-electronics.com PTN Electronics Limited Tel: +86-755-2846 1819 Fax: +86-755-8471 7796 Email: info@PTN-electronics.com Website: www.PTN-electronics.
