Instruction manual

OPERATING THE CONTROL INTERFACE SOFTWARE
TMC-6700/ TMC-1000 Camera Control Software Manual Page 7
5.7.2 External White Balance Control
Selecting External White Balance mode enables you to set
your own white balance parameters. To select an External
White Balance mode, select “Ext” from the WB combo
box.
You can input specific R Gain and B Gain values between
–128 and 127 by using the slider control, text box, or
arrow buttons. The large arrow buttons set values in
increments of 10, while the small arrow buttons set values
in increments of 1.
5.8 Gain Control
You can change the Gain value by using the Gain control panel.
To change this value, type the desired number directly in the text
box, move the Gain slider control, or click the up/down arrow
buttons. The large up/down arrow buttons vary the value in
increments of 10, while the small up/down arrow buttons vary the
value in increments of 1. The Gain control value allows you to
select any integer between 80 and 100.
5.9 ADC Offset Control
The ADC Offset control panel allows you to change the ADC
(Analog to Digital Converter) Offset value. To change this
value, edit the value directly in the text box, slide the Gain
slider control, or click the large and small up/down arrow
buttons. The large up/down arrow buttons vary the value in
increments of 10, while the small up/down arrow buttons vary
the value in increments of 1. The ADC Offset control value can
be any integer between 200 and 250.
5.10 ADC Reference Top Control
You can change the ADC Reference Top value by using the
ADC Reference top control panel. To change this value, edit
the value in the text box, either by moving the Gain slider
control, or by clicking the large and small up/down arrow
buttons. The large up/down arrow buttons vary the value in
increments of 10, while the small up/down arrow buttons vary
the value in increments of 1. You can select any ADC
Reference Top integer value from 0 to 255.