Instruction manual

OPERATING THE CONTROL INTERFACE SOFTWARE
TMC-6700/ TMC-1000 Camera Control Software Manual Page 5
5.3.1 Manual Shutter Mode and Asynchronous Shutter Mode
Select “Manual” or “Async” from the shutter mode combo box. You can input the shutter speed value (0
to 9) by using the text box or arrow buttons. The preset shutter value (Exposure time) of each dial 0 - 9
can be defined in the Preset shutter control (Refer to Section 5.13.4 on page 9 for details).
5.3.2 Direct Shutter Mode
Selecting “Direct M” (Manual) or “Direct A” (Asynchronous) from the shutter mode combo box
enables you to use direct manual or direct asynchronous shutter. Direct shutter value is defined in the
“Preset shutter control” (Refer to Section 5.13.4 on page 9 for details).
5.4 Edge Enhancement Control
The Edge Enhancement combo box allows you to select among the
following edge enhancement settings.
•
The H (Horizontal) edge enhancement
•
The V (Vertical) edge enhancement
•
The H&V edge enhancement function.
You can also choose between Edge Enhancement Levels 1 and 2 by using the up/down arrow buttons.
5.5 Gamma Control
The Gamma Control Select combo box allows you to switch between Gamma
correction on and off.
5.6 Color Matrix Control
The Color Matrix Control panel allows you to control the Color Matrix value.
5.6.1 Unity, Preset1, Preset2
The TMC-6700/TMC-1000 camera has two preset Color Matrix values. You can select between these
two preset values or the default value (Unity) from the Color Matrix combo box.