Instruction manual

OPERATING THE CONTROL INTERFACE SOFTWARE
Page 6 TMC-6700/ TMC-1000 Camera Control Software Manual
5.6.2 User Setting
The Color Matrix Setting window appears when you select “User” from the combo box.
This window allows you to change the Color Matrix values to any number between –3.96875 and
3.96875 by clicking the up/down arrow buttons or editing each text box directly. The up/down arrow
buttons set values in increments of 0.03125. Users must first start by changing the values of RR, GG,
and BB. Then, chnage the value of RG. The software will automatically change the value of RB to meet
the condition of RR+RG+RB=1. The same applies to all three rows. This condition keeps white as white
after color matrix conversion.
By selecting “Load” from the menu bar, you can load the Color Matrix values of “Unity,” “Preset1” or
“Preset2.”
5.7 White Balance Control
The WB (White Balance) combo box allows you to select either Internal White Balance mode or
External White Balance mode. WB status indicates which WB mode you have selected.
5.7.1 Internal White Balance Control
Selecting Internal White Balance mode enables auto white
balance adjustment of the camera controlled internally by the
accumulator built-in DSP. To select an Internal White Balance
mode, select “Int” from the WB combo box.
Clicking the Hold button when “Internal” is selected on the White Balance combo box holds the current
white balance setting. Clicking it again releases the white balance setting and returns to auto-tracking
internal white balance.