Instruction manual

Page 31
Installation
TM-1327GE Hardware
7 Installation
The following instructions will help you to set up your camera quickly and easily. JAI PULNiX
suggests that you read through these instructions first, before you unpack and set up your camera
system.
7.1 Getting Started
7.1.1 Unpacking Instructions
JAI PULNiX recommends that you save the original packing cartons for the cameras and accessories in
case you need to return or exchange an item.
We also recommend that you bench-test any equipment being sent to another location for field
installation to assure that everything is fully operational as a system.
7.1.2 Components
When you receive your TM-1327GE camera from JAI PULNiX, the contents of the shipping box
should include the camera and a document download card. If either of these items are missing, contact
your JAI PULNiX representative immediately. The document download card includes instructions and
web locations for downloading the datasheet, manual, and camera-control software. If you do not have
Internet access, contact JAI PULNiX to receive this material on a CD-ROM.
7.1.3 Accessories and Options
The following additional accessories and options may be required for your application:
• PD-12U series power supply
• 12P-02S power cable
• Cat5e or cat6 shielded Ethernet cable (not supplied by JAI PULNiX)
Check with your JAI PULNiX representative before you install your camera to determine what you
might need.