Instruction manual

Page 39

Operation

TM-1327GE Hardware

This requirement makes digital output the preferred choice, because the timing relationships are very

accurate.

8.2.3 Starting Pixel Configuration

All manufacturers produce identical Bayer CFAs, but there are slight differences between the CCDs

produced by different manufacturers. The first line is generally R and G. The camera timing can be

adjusted to start with either G or R by skipping the very first pixels at each lines. The majority of color

interpolation software can select between a variety of pixel relations, such as R/G start or G/R start, as

well as G/B start and B/G start. Once the correct scanning is configured, the rest of the interpolation

will be exactly the same. Please contact JAI PULNiX for further information regarding CCD

manufacturers.

FIGURE 28. Example of Color CCD CFA Pattern

Pixel 1

Last pixel of 1st Line

Last pixel

Horizontal Shift Registers

CCD Output

GGG GGG

GG GG G

RR RR R

BBB BBB

CCD