Instruction manual

Page 42
Operation
TM-1327GE Hardware
lines of vertical resolution, as compared to a conventional CCD camera which captures only half the
vertical lines per shutter.
8.4 External Sync
The TM-1327GE accepts an external synchronization of standard HD and VD on CC3 and CC4 of the
Gigabit Ethernet connector for general locking to an external source. The tolerance is ±2% horizontal
frequency.
8.5 Asynchronous Reset
The TM-1327GE camera includes the following modes to control the asynchronous reset and shutter
speed:
• Async No Shutter (recommended for strobe applications)
• Async Direct Shutter
• External VINIT with Pulse Width (No-Delay Shutter)
8.5.1 Async No Shutter
Async No Shutter allows for strobe and back-to-back strobing (strobing both before the transfer gate
and right after) applications as shown in Figure 30.
Figure 30. Async No Shutter
LDV
Ext. Vinit
FDV
Transfer Gate
Analog Video
During FDV Blanking
During Active Video Period
Strobe
Discharge