Instruction manual

Page 1

Software Introduction

TM-1327GE Software

Operation Manual

1 Software Introduction

1.1 Scope of the Document

This manual describes how to access and use features specific to JAI PULNiX's Gigabit Ethernet

camera, the TM-1327GE. The camera’s different operation modes are described in the hardware section

of this manual, which begins on page 29.

The TM-1327GE series consists of the TM-1327GE (monochrome) and the TMC-1327GE (color).

Unless otherwise noted, all information contained in this manual is relevant to both models.

1.2 Related Documents

The appendix contains descriptions of the TM-1327GE camera’s internal frame grabber and how to

connect the camera. The appendix complements, and should be used in conjunction with the three

following documents:

• Cam2Net User’s Manual

• Cam2Net IP Device Drivers

• Cam2Net C++ SDK Reference Manual

These documents are part of the GigE software package and are added to your system when the

software is installed.

1.3 Gigabit Ethernet Camera Interface

The GigE interface provides an easily connectable, high-bandwidth imaging solution, where video data

is sent as IP packets over an industry-standard GigE network.