Datasheet

ML15.051
MiniLine
5V, 3A, SINGLE PHASE INPUT
18. APPROVALS
IEC 60950-1 CB Scheme,
Information Technology Equipment
UL 508
LISTED E-File: E198865
Industrial Control Equipment
UL 60950-1 RECOGNIZED for the use in U.S.A. (UL 60950-1) and Canada (C22.2
No. 60950-1) E-File: E137006
Information Technology Equipment, Level 3
NEC Class 2
NEC CLASS 2
According to NEC (National Electrical Code) Article 725-41 (4).
Listed as Limited Power Source (LPS) in the UL 60950-1 UL report.
ANSI / ISA 12.12.01-2000
RECOGNIZED E246877 recognized for use in U.S.A. (ANSI / ISA
12.12.01-2000) and Canada (C22.2 No. 213-M1987)
Hazardous Location Class I Div 2 T4 Groups A,B,C,D
The unit is suitable for use in Class I Division 2 Groups A, B, C, D locations. Substitution of
components may impair suitability for Class I Division 2 environment. Do not disconnect
equipment unless power has been switched off. Wiring must be in accordance with Class I,
Division 2 wiring methods of the National Electrical Code, NFPA 70, and in accordance with
other local or national codes.
CSA 22.2 No107.1-01
CSA approval for Canada
CAN/CSA C22.2 No 107-1; CAN/ CSA 60950-1-03; UL60950-1
Marine,
pending
GL (Germanischer Lloyd) classified and
ABS (American Bureau for Shipping) PDA
Environmental category: C, EMC2
Marine and offshore applications
19. FULFILLED STANDARDS
EN 61558-2-17 Safety of Power Transformers
EN/IEC 60204-1 Safety of Electrical Equipment of Machines
EN/IEC 61131-2 Programmable Controllers
EN 50178, IEC 62103 Electronic Equipment in Power Installations
20. USED SUBSTANCES
The unit does not release any silicone and is suitable for the use in paint shops.
The unit conforms to the RoHS directive 2002/96/EC
Electrolytic capacitors included in this unit do not use electrolytes such as Quaternary Ammonium Salt Systems.
Plastic housings and other molded plastic materials are free of halogens, wires and cables are not PVC insulated.
The production material within our production does not include following toxic chemicals:
Polychlorized Biphenyl (PCB), Polychlorized Terphenyl (PCT), Pentachlorophenol (PCP), Polychlorinated naphthalene
(PCN), Polybrom Biphenyll (PBB), Polybrom Bipheny-oxyd (PBO), Polybrominated Diphenylether (PBDE), Polychlorinated
Diphenylether (PCDE), Polydibromphenyl Oxyd (PBDO), Cadmium, Asbest, Mercury, Silicia
Oct. 2009 / Rev. 1.2 DS-ML15.051-EN
All parameters are specified at 5V, 3A, 230Vac input, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
14/21