Datasheet

ML60.121
MiniLine
12V, 4.5A, SINGLE PHASE INPUT
18. APPROVALS
EC Declaration of
Conformity
The CE mark indicates conformance with EMC directive
2004/108/EC and the low-voltage directive (LVD) 2006/95/EC.
IEC 60950-1
2
nd
Edition
CB Scheme,
Information Technology Equipment
UL 508
IND. CONT. EQ.
Listed for the use as Industrial Control Equipment;
E-File: E198865
UL 60950-1
2
nd
Edition
Recognized for the use as Information Technology Equipment,
Level 3 in U.S.A. (UL 60950-1) and Canada (C22.2 No. 60950-1);
E-File: E137006
NEC Class 2
NEC CLASS 2
Listed as Limited Power Source (LPS) in the UL 60950-1 UL report.
According to NEC (National Electrical Code) Article 725-41 (4).
Marine
GL (Germanischer Lloyd) classified
Environmental category: C, EMC2
Marine and offshore applications
xxxxxxxx
GOST P,
pending
Certificate of Conformity for Russia and other GUS countries
19. FULFILLED STANDARDS
EN 61558-2-17 Safety of Power Transformers
EN/IEC 60204-1 Safety of Electrical Equipment of Machines
EN 50178, IEC 62103 Electronic Equipment in Power Installations
EN/IEC 61131-2 Programmable Controllers
except for chapter 6.4.2.1 (Gradual shut-down/start-up test)
20. USED SUBSTANCES
The unit does not release any silicone and is suitable for the use in paint shops.
The unit conforms to the RoHS directive 2002/95/EC.
Electrolytic capacitors included in this unit do not use electrolytes such as Quaternary Ammonium Salt Systems.
Plastic housings and other molded plastic materials are free of halogens, wires and cables are not PVC insulated.
The production material within our production does not include following toxic chemicals:
Polychlorized Biphenyl (PCB), Polychlorized Terphenyl (PCT), Pentachlorophenol (PCP), Polychlorinated naphthalene
(PCN), Polybrom Biphenyll (PBB), Polybrom Bipheny-oxyd (PBO), Polybrominated Diphenylether (PBDE), Polychlorinated
Diphenylether (PCDE), Polydibromphenyl Oxyd (PBDO), Cadmium, Asbestos, Mercury, Silicia.
xxx. 201x / Rev. 1.1 DS--ML60.121-EN
All parameters are specified at 12V, 4.5A, 230Vac input, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
14/22