Data Sheet

Table Of Contents

DESCRIPTION

A buffer PSU is used for an uninterrupted supply to devices requiring stabilised voltage of 12V DC (+/-15%).

The PSU provides voltage of 13,8V DC. Current efficiency:

1. Output current 10A + 1A battery charge*

2. Output current 7A + 4A battery charge*

Total device current + battery: 11A max*.

In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on

the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003)

which can accommodate a 65Ah/12V battery. A micro switch indicates door opening (front cover).

wyjście TAMPER : przewody 30cm

Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl

HPSB 11A12E

HPSB 13,8V/10A/65Ah B

v.1.0/VIII

uffer, switch mode power supply unit

CODE:

TYPE:

Pulsar

HPSB series power supply unit

Buffer, switch mode power supply unit 13,8V DC

Features:

· DC 13,8V/10A uninterruptible power supply*

· fitting battery: 65Ah/12V

· wide range of mains supply: 176÷264V

· high efficiency 83%

· battery charging and maintenance control

· excessive discharging (UVP) protection

· jumper selectable battery charge current 1A/4A

· battery output full protection against short-circuit

and reverse polarity connection

· LED indication

· protections:

· SCP short-circuit protection

· OVP overvoltage protection

· overvoltage protection (input AC)

· against sabotage

· overload protection (OLP)

· warranty – 2 year from the production date

EN**

* Refer to chart 1

PAGE 1
Pulsar HPSB series power supply unit Buffer, switch mode power supply unit 13,8V DC CODE: TYPE: HPSB 11A12E EN** v.1.
PAGE 2
HPSB series power supply unit Pulsar Buffer, switch mode power supply unit 13,8V DC SPECIFICATIONS PSU type Mains supply Current up to Supply power Efficiency Output voltage Output current tAMB<30°C Output current t AMB=40°C Voltage adjustment range Ripple Battery charge current Short-circuit protection SCP Overload protection OLP Battery circuit protection SCP and reverse polarity connection Surge protection Overvoltage protection OVP Excessive discharge protection UVP Protection against sabotage: - TAMP
PAGE 3
Pulsar HPSB series power supply unit Buffer, switch mode power supply unit 13,8V DC Optional configurations: Buffer power supply unit HPSB 13,8V/20x0,5A/65Ah. LB4 - HPSB11A12E + 2xLB8 16x0,5A (AWZ578 or AWZ580) + LB4 4x0,5A (AWZ574 or AWZ576) +65Ah 13.8V 4x0,5A HPSB11A12E AC 230V LB8 13.8V 13.8V 8x0,5A DC 13.8V LB8 Battery 65Ah 13.8V 8x0,5A LB2 Buffer power supply unit HPSB 13,8V/10x1A/65Ah. - HPSB11A12E + LB8 8x1A (AWZ579 or AWZ580) + LB2 2x1A (AWZ585 or AWZ586) + 65Ah 13.
PAGE 4
Pulsar HPSB series power supply unit ® Buffer, switch mode power supply unit 13,8V DC Optional configurations: Buffer power supply unit HPSB 13,8V/2x12V/10x1A/65Ah. LB8 RN500 13.8V HPSB11A12E - HPSB11A12E + 2xRN500 (13,8V/12V) + 2xLB8 10x1A (AWZ579 or AWZ580)+ 65Ah 230V AC 12V 13.8V RN500 DC 13.8V 13.8V Battery 65Ah LB8 12V 13.