Owner's manual

13
2000 PSI Pressure Washer
High Pressure Setting
CLEAN-UP AND STORAGE
Shutting Down the Pressure Washer
WHEN FINISHED USING THE PRESSURE WASHER,FOLLOW THESE
STEPS TO SHUT DOWN THE UNIT:
Turn the pressure washer to the OFF position.
Turn off the water supply.
Before disconnecting high-pressure hose connection, point the gun in a
safe direction and discharge the high-pressure water.
Disconnect high-pressure hose from the pressure washer and gun.
Disconnect garden hose from the pressure washer.
Remove excess water from the pump by tipping the unit on both sides to
drain any remaining water from the inlet and outlet fittings.
Remove the Water Intake Filter and flush with water to remove dirt or
debris. Return the filter once it is cleaned.
•
•
•
•
•
•
•
High Pressure
Hose Connection
Garden Hose
Connection