Data Sheet

Accessories for cabinets - power distribution unit
Pulsar
®
RALZ/F v1.0/III
FPower distribution unit 230VAC - 8 sockets / type
CODE
NAME
:
:
INTENDED USE
The power distribution unit is to be mounted between RACK rails. It enables plugging up to 8 devices supplied with 230VAC.
SPECIFICATIONS
Mounting dimensions
External dimensions wire=173cm
Net/gross weight
Materials: outlets: ABS, black; external enclosure: aluminium
Number of outlets
Use inside
- backlit on/off switch
- four-point fixing to the front RACK rails
- 4 M6 screws + cage nuts included
: W=19", H=1U
: W=484, H=45, D=47 [mm, +/-2], L
: 0,9 / 1,0 [kg]
: 8
230VAC/50Hz
15A
3500W
:
Notes: - socket type: F („Schuko”)
- plug type: E/F („Unischuko”)
Declaration: CE
Rated voltage:
Rated current:
Maximum load:
2
Cross-section of wires: 3x2,5mm
Tel. [phone], Fax. [phone], www.pulsar.pl, e-mail: [e-mail]
EN
plug:
type: E/F („Unischuko”)
socket:
type: F („Schuko”)
19"
4
5
m
m
47 mm
484 mm
1
U
WEEE LABEL
Waste electrical and electronic equipment must not be disposed of with normal household
waste. According to the European Union WEEE Directive, waste electrical and electronic
equipment should be disposed of separately from normal household waste.