Data Sheet

S64 v1.2/IV
S64 6-port switch for 4 IP cameras
CODE
TYPE
:
:
DESCRIPTION
6 6S 4 is a -port PoE switch designed to supply IP cameras operating in IEEE 802.3af/at standard. Automatic
detection of any devices powered in the standard is enabled at the 1 – 4 ports of the switch. The UP LINK
ports is used for connection of another network . The LEDs at the front panel indicate the
operation status.
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to
supply a separate power cable for each device. This method allows supplying other network devices, such as IP
phone, wireless access point or router.
PoE/PoE+
device via RJ45 connector
EN**
Pulsar
®
S64 6-port switch for 4 IP cameras
Ports
6 10/100Mb/s ports (4 x PoE + 2 x UP LINK)
with connection speed auto-negotiation and MDI/MDIX Auto Cross
PoE power supply
IEEE 802.3af/at (1÷4 ports), 52 V DC / 30 W at each port *
Long Range mode
Long Range, VLAN
Protokoły, Standardy
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Bandwidth
1,6Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply;
Link/Act;
PoE Status
Power supply
~100-240 V; 50/60 Hz; 1,3 A
the PSD 520115 52 V DC/1,15 A/60 W max. power supply type desktop
Operating conditions
temperature -10°C ÷ 40°C,
relative humidity 5% - 90%, no condensation
Dimensions
W=118, H=28, D=85 [+/- 2mm]
Additional equipment
plate to be fixed surface
Net/gross weight
0,5/0,7kg
Protection class
EN 60950-1:2007
II (second)
Storage temperatur
-20°C ÷ 60°C
Declarations, warranty
CE, 2 year from the production date
Features:
· Switch 6 ports
4 PoE ports 10/100Mb/s (data transfer and power supply)
2 ports 10/100Mb/s (UP LINK)
· Long Range mode (up to 250m)
· 30 W for each PoE port, supports devices complaint with
the IEEE802.3af/at (PoE+) standard
· Supports auto-learning and auto-aging of MAC addresses
(1K size)
· The PSD 520115 52 V DC/1,15A/60 W max.
Power supply desktop type included
· Additional assembly elements
· LED indication
· warranty – 2 year from the production date
TECHNICAL PARAMETERS
* The given value of 30 W per port is the maximum value. The total power consumption should not exceed 48 W.
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
W
H
D