Instructions / Assembly

10 Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call [phone].
Troubleshooting
Scooter will not run.
Scooter run time is short.
Scooter suddenly stops working.
Scooter runs sluggishly.
Battery is not charged. Fully charge the battery. First charge should be 10 hours and up to
8 hours for recharges.
Wires or connectors are
loose or unplugged.
Battery requires charging.
Loose plug or wire.
Thermal Fuse activated.
Battery will not accept full
charge.
Check to ensure that charger is tightly plugged into both the wall
and the scooter. Check all scooter plugs and connections are
correctly attached.
Fully charge the battery. First charge should be 10 hours and up to
8 hours for recharges.
Check to ensure that battery charger is tightly plugged into both the
wall and the scooter.
Check all wires and connectors to make sure they are connected
and tight.
The Thermal Fuse will automatically activate via a power reduction
when the motor is overloaded.
An excessive overload (steep incline or too heavy of a rider) could
have caused the motor to overheat and activated the Thermal Fuse.
Scooter may run sluggishly but will return to full power after a few
moments.
Make sure power ow to the wall outlet is on.
Battery may need to be replaced. Even with proper care,
rechargeable batteries do not last forever. The average
rechargeable battery life is 1 to 2 years depending on scooter
conditions and use. Replace only with Pulse Performance Products
replacement batteries.
Problem Possible Cause Solution
Scooter is overloaded.
Unsuitable riding
conditions.
Make sure you do not overload the scooter by exceeding the 50 lbs.
(22 kg.) maximum weight limit, going up steep inclines or towing
objects behind the scooter. Avoid overloading the scooter as this will
prematurely wear out the batteries and components.
Ride only on solid, at, clean and dry surfaces such as pavement or
level ground.