Instructions / Assembly

4 Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call [phone].
MATERIAL.
TITLE.
DWG NO.
REV.
SHEET 1 OF 1
SCALE: 1:10
DO NOT SCALE DRAWING
1. DIMENSIONS APPLY BEFORE PLATING OR COATING.
2. REMOVE ALL BURRS, BREAK SHARP EDGES .
3. ALL APPLICABLE BRAVO STANDARDS AND
SPECIFICATIONS APPLY.
UNLESS OTHERWISE SPECIFIED:
METRIC
THIRD ANGLE PROJECTION
1
0.5
0.25
0.1
1°
X.
X.X
X.XX
X.XXX
ANGULAR
C
SIZE
FINISH.
This document is the property of Bravo. All rights are reserved, including copyrights.
TOLERANCES.
DATE
2010-9-1
DRAWN
Sky Shi
APPR
METRIC_C
COLOR.
BRAVO SPORTS
12801 CARMENITA ROAD
SANTA FE SPRINGS, CA, 90670
USA
SHANGHAI OFFICE:
RM 1501/1508, ORIENT CENTER
699 NANJING ROAD WEST
SHANGHAI, CHINA, 200041
Required Tools
10mm wrench
(included)
5mm hex wrench
(included)
Before You Start
WARNING: This scooter must be assembled by an adult! Remove all packing and items from the display box.
• Allow up to 20 minutes for assembly, not including initial charge time.
• Allow up to 10 hours for the initial charge (see page 6 for charging information).
Estimated Assembly Time
WARNING: DO NOT USE NON-PULSE PERFORMANCE PRODUCTS™ WITH YOUR PULSE
PERFORMANCE PRODUCTS™ ELECTRIC SCOOTER. This scooter has been built to specic Pulse
Performance Products™ design specications and should not be modied. Altering of the original components
may or may not be compatible with the design and will void the warranty.
battery charger
(included)
charging
port
Go Button