BONZAI Bonzai Shower System Model #1017-B & 1017-S Owner's Manual
1011-Parts Legend 1. 2. 3. 4. 5. 6. 7. 8. 9. 2 ½" x 2½" NPT Nipple PTFE (plumber's) Tape Chrome 90˚ w/ Cone Washer Tapered Plastic Washer Chrome Finned Nut Escutcheon Base Escutcheon Cover Thin Escutcheon (Optional) Supply Line 10. 11. 12. 13. 14. 15. 16. 17. 18. 2.5 GPM Flow Restrictor Screened Rubber Washer 90˚ Inlet Mount............................. (2) Mounting Screw............. (2) Metal Washer................. (2) Nylon Anchor.................. (2) #4 x 1/2" Screw............... (8) Cover Plate.
Installation Thank you for choosing the Bonzai Shower System by PULSE ShowerSpas! Assembly and installation of the Bonzai Shower System is designed to be quick and easy. If you have installation questions or performance problems, call PULSE Customer Service toll free at 888-785-7320 or visit www.pulseshowerspas.com. Please read instructions carefully, become familiar with all parts, installation procedures and tools required. Follow the steps in the order presented to help avoid any mistakes.
Usage The arched shower arm pivots from side to side. Turn diverter either direction to change functions or set between functions for further enjoyment. Turn face of hand shower to switch settings. Adjust the hand shower position by loosening the knob on the hanger and rotating forward or back. Always turn cold water on first to help prevent any accidental burning or scalding; especially for children and elderly.