AquaRain Shower System Model #1019-BN, 1019-CH, 1019-ORB PW-91019-1325BRN, PW-91019-1325CP, PW-91019-1325BRZ Owner's Manual
AquaRain Shower System Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Installation Instructions 1 4 Remove existing shower arm and shower head. Wrap threads of shower pipe with Teflon tape and/or pipe sealant to make ensure no leaks. Slide escutcheon against wall, make sure the shower system is leveled. 5 2 Secure set screw. DO NOT OVERTIGHTEN. Slide escutcheon over threaded shower pipe. 3 6 TIP Insert threaded pipe into female wall fitting and tighten securely. TIP: Use diverter body to tighten by hand or use a pipe wrench on inlet piece closest to wall.
Installation Instructions 7 10 CAUTION: Live Plumbing Mark wall for two mounting holes. Before drilling ensure no live plumbing can be damaged. Slowly drill 1/4" (6mm) wide by 1" (25mm) deep holes 22 5/8 inches (575mm) apart. Slide ABS soap dish (12) onto slide bar followed by narrow end of tapered nylon sleeve (11). IMPORTANT: Supplied anchors are for solid surfaces only i.e. tiles, marble, etc. If mounting to hollow or fiberglass wall, a different anchor/screw and hole size may be required.
Installation Instructions 13 Place washer (2) in hex end of hose (15) and connect to diverter outlet. Place washer (2) in tapered end of hose and connect handshower (13). Place handshower onto holder. Insert rubber washer (2) in showerhead (1) and secure showerhead (1)to shower arm (3). 14 Product fully assembled.
8" Showerhead 5-Function Handshower Provides a drenching, gentle cascade of water. Diverter located on shower arm. Pulsating massage, wide and massage, jet, wide, wide and bubble. Adjust height along slide bar. Soap Dish & Slide Bar Flexible Slide Bar Installation Height of soap dish can be adjusted along slide bar. Place slide bar at desired height and position.
Usage Diverter control switches from the shower head and handshower functionality. Turn face of hand shower to switch settings. Adjust the hand shower position by loosening the hand shower hanger and sliding up or down. Care and Maintenance To keep your Shower System looking new, wipe down after each use with a soft cotton cloth. Protect your Shower System from hard water stains and mineral deposits by periodically using an auto spray wax. Clean using mild liquid soap and a non-abrasive sponge or cloth.
NOTES PULSE ShowerSpas, Inc. | 297 Anna Street | Watsonville, CA 95076 | 831.724.7300 www.PulseShowerSpas.
