Installation & Assembly
Installation Instructions
1
Remove existing shower arm and shower head.
Wrap threads of shower pipe with Teon tape and/or pipe sealant to
make ensure no leaks.
Slide escutcheon over threaded shower pipe.
Insert threaded pipe into female wall tting and tighten securely.
TIP: Use diverter body to tighten by hand or use a pipe wrench on inlet
piece closest to wall.
6
Secure set screw. DO NOT OVERTIGHTEN.
Hold adjustable slide bar (6) in desired mounting location. Evaluate range of
adjustment and potential interference of handshower hose (15). Use level to
assure shower pipe is straight.
Slide escutcheon against wall, make sure the shower system is leveled.
TIP
4
2
5
3