Leilani ShowerSpa Model #1022-B Owner's Manual
Leilani ShowerSpa Model #1022-B Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Product Dimensions 3
Parts Legend 1. ShowerSpa 6. Cap.....................................(2) 11. Lock Washer.......................(4) 2. Showerhead 7. Hand Shower 12. Rubber Washer..................(3) 3. Shower Arm 8. Hand Shower Holder 13. Mount Bracket 4. Slide Bar 9. Hand Shower Hose 14. Mounting Screw................(2) 5. Bracket...............................(2) 4 10. Machine Screw..................(4) 15. Nylon Anchor.....................
Assembly Some Assembly is Required Prior to Installation. Slide Bar Assembly Refer to exploded line drawing for reference. 1. Hold slide bar (4) with grooves facing away from you. Press button on hand shower holder (8) and place onto slide bar (4) with holder facing you and button on top. 2. With slide bar (4) facing you, align grooves on bracket (5) with grooves on back of slide bar (4). Screw holes on bracket (5) should extend to left side of bar. Insert bracket (5) until flush with opening.
Installation New Construction or Extensive Remodel – New Finished Wall Surface 1. Prior to sheetrock, stub-out ½" hot and cold supply lines beyond finished wall surface, 4" on center. For best results, attach 90° brass fittings (available at most hardware stores) to the stub-outs maintaining ¼" – ½" of space between the fitting and finished wall. The open end of the 90° brass fittings should point down so the supply lines attach parallel to the wall. 1 6.
Usage Pressure Balance Mixing Valve The Leilani ShowerSpa is eqiuipped with a cUPC® pressure balance mixing valve to adjust water flow and temperature. The valve automatically adjusts to changes in water pressure (i.e. someone flushes a toilet), keeping your temerature constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the handle until the desired flow rate is achieved. Rotate to the right to decrease temperature and rotate to the left to increase temperature.
Manufacturer’s Limited Warranty PULSE Shower Spas, Inc. warrants that all ShowerSpas are free from defect in workmanship and/or materials for a period of three years from the date of purchase. This warranty extends to the original purchaser only and is non-transferable.
