Owner's manual

Assembly

Some Assembly is Required Prior to Installation.

Slide Bar Assembly Refer to exploded line drawing for reference.

1. Hold slide bar (4) with grooves facing away from you. Press button on hand shower holder (8) and place onto slide bar (4) with holder fac-

ing you and button on top.

2. With slide bar (4) facing you, align grooves on bracket (5) with grooves on back of slide bar (4). Screw holes on bracket (5) should extend to

left side of bar. Insert bracket (5) until ﬂush with opening. Push cap (6) into slide bar (4) opening. Repeat for other end.

3. Align assembled slide bar with pre-drilled holes on right side of ShowerSpa. Secure with machine screws (10) and lock washers (11).

After ShowerSpa is Mounted to Wall

Attach Hand Shower and Hose

1. Insert rubber washer (12) into hexagon shaped end of hand shower hose (9) and attach to threaded outlet on bottom of ShowerSpa.

DO NOT OVER-TIGHTEN.

2. Insert rubber washer (12) into tapered end of hand shower hose (9) and attach to hand shower (7). DO NOT OVER-TIGHTEN. Insert hand

shower (7) into holder on slide bar (4).

Attach Shower Head

3. Insert rubber washer (12) into showerhead (2) and hand tighten onto the shower arm (3).