Installation Instructions

Assembly

After Unpacking Your ShowerSpa, Some Assembly Is Required Prior To Installation

Slide Bar Assembly Refer to exploded line drawing for reference.

1. Hold slide bar (4) with grooves facing away from you. Press button on handshower holder (8) and place onto slide bar (4) with holder

facing you and button on top.

2. With slide bar (4) facing you, align grooves on bracket (5) with grooves on back of slide bar (4). Screw holes on bracket (5) should extend

toleftsideofbar.Insertbracket(5)untilushwithopening.Pushcap(6)intoslidebar(4)opening.Repeatforotherend.

3. Align assembled slide bar with pre-drilled holes on right side of ShowerSpa. Secure with machine screws (10) and lock washers (11).

After ShowerSpa Is Mounted To The Wall

Connect The Handshower

1. Insert rubber washer (12) into hexagon shaped end of handshower hose (9) and attach to threaded outlet on bottom of ShowerSpa.

DO NOT OVER-TIGHTEN.

2. Insert rubber washer (12) into tapered end of handshower hose (9) and attach to handshower (7). DO NOT OVER-TIGHTEN. Insert hand

shower (7) into holder on slide bar (4).

Attach Showerhead

1. Insert rubber washer (12) into showerhead (2) and hand tighten onto the shower arm (3).

nstallation