Installation Instructions

7
Usage
Pressure Balance Mixing Valve
ThisShowerSpaisequippedwithacUPC®pressurebalancemixingvalvetoadjustwaterowandtemperature.
Thevalveautomaticallyadjuststochangesinwaterpressure(i.e.someoneushesatoilet),keepingyourtemperature
constantandpreventingaccidentalscalding.ToturnontheShowerSpasimplyraisethehandleuntilthedesiredow
rate is achieved. Rotate to the right to decrease temperature and rotate to the left to increase temperature. Be sure
that the handle is in the OFF position when you are done using your ShowerSpa so that pressure does not build up
inside the unit.
Brass Diverter
The brass diverter is used to change between ShowerSpa functions. Simply rotate the diverter knob either
direction to select the desired function—showerhead, handshower, body jets or tub spout.
Shower Arm
The shower arm on the ShowerSpa has a unique feature that allows you to change the height and angle of the
showerhead. The wingnut closest to the panel adjusts the height and the wingnut closest to the showerhead
adjusts the angle. Loosen one of the two wingnuts, reposition the showerhead and retighten the wingnut.
Body Jets
This ShowerSpa comes with six dual-function body jets. Our new Select-A-Jet™ feature allows you to run between
twoandsixbodyjetsatonce.Thetoptwojetsarealwaysonbuttheotherfourjetscanbeturnedoindepen-
dently,increasingpressuretotheremainingjetsinuse.Thejetshavebothapowersprayandnemistfunction.
Simplyrotatethefaceofthejettoselectthedierentfunctionsorturnthemo.
Handshower
The handshower has three individual functions and two combo functions. Rotate the head of the handshower left
or right to change between the power spray, pulsating massage or gentle cascade functions. To adjust angle of
handshower gently rotate toward you or toward the wall. For vertical adjustment simply depress the button and
slide holder up or down.
Care and Maintenance
Always blot dry any water from the surface of your ShowerSpa. To protect your ShowerSpa from hard water
stains and mineral deposits, use an auto spray wax periodically and wipe down your ShowerSpa after each use.
Allowing water to evaporate on the surface can lead to a buildup of mineral deposits. Cleaning with a damp,
nonabrasive sponge and drying with a clean soft cloth should help keep your ShowerSpa looking beautiful.
REMEMBER
NEVER use any abrasives or harsh cleaners!
Clean with mild soap and water ONLY!
To keep your ShowerSpa in pristine condition,
DRY AFTER EACH USE!