Installation Guide

CONTACT PULSE SHOWER SPAS AT 1

888

PULSE

www.pulseshowerspas.com

GENERAL DESCRIPTION

PULSE ShowerSpas introduces the Island Falls Stainless-Steel

Rain Showerhead collection, available in 150mm, 200mm,

and 250mm sizes with brushed-matte or polished ﬁnish.

PRODUC T F E AT URES

•

Replaces your existing showerhead in seconds

•

Soft durable silicone rubber spray tips ensure Spray-

Straight™ performance

•

#304 Stainless-Steel construction in either Brushed-matte

or Polished ﬁnish

•

Super thin proﬁle with robotic laser-welded leading edge

•

Available in 3 sizes - 150mm (6-Inch) (66 spray tips),

200mm (8-Inch) (92 spray tips), or 250mm (10-Inch) (128

spray tips)

•

Swivel brass ball joint for angle adjustment

•

Rub tips for easy cleaning of mineral build-up

SPECIFICATIONS

•

2.5-GPM(9.5-LPM) Flow rate

•

½-Inch-14 NPT Female Connection

Island Falls Stainless-Steel Showerhead

MODEL #

#2001-150M #2001-200M #2001-250M

#2001-150P #2001-200P #2001-250P

PAGE 1
Island Falls Stainless-Steel Showerhead MODEL # #2001-150M #2001-200M #2001-250M #2001-150P #2001-200P #2001-250P GENERAL DESCRIPTION PULSE ShowerSpas introduces the Island Falls Stainless-Steel Rain Showerhead collection, available in 150mm, 200mm, and 250mm sizes with brushed-matte or polished finish.
PAGE 2
ISLAND FALLS STAINLESS-STEEL SHOWERHEAD 1 2 3 Installation 1. TURN OFF WATER SUPPLY TO SHOWERHEAD 2. Wrap plumber's tape in a counter-clockwise direction 2-3 times around the threads of the shower arm and press the tape into the threads. 3. Screw showerhead onto the shower arm in clockwise direction and hand-tighten. Do not over-tighten. Flow Restrictor Removal For more water flow, a circular plastic flow restrictor can be pulled out of showerhead. If removed, flow rate will exceed 2.5-GPM(9.5-LPM).