Installation Guide

ManualsBrandsPULSE Showerspas ManualsMixing Valves2-Way Diverter and Square Trim Kit in Chrome

Tru-Temp Two Way Diverter Valve

Model #3005-RIVD-BN, 3005-RIVD-CH, 3005-RIVD-MB, 3005-RIVD-ORB

PW-93005-64TRBRN, PW-93005-64TRCP, PW-93005-64TRBM, PW-93005-64TRBRZ

Tru-Temp Two Way Diverter Valve with Square Trim

Model #3007-RIVD-BN, 3007-RIVD-CH, 3007-RIVD-MB, 3007-RIVD-ORB

PW-93007-65TRBRN, PW-93007-65TRCP, PW-93007-65TRBM, PW-93007-65TRBRZ

Summary of content (8 pages)

PAGE 1
Tru-Temp Two Way Diverter Valve Model #3005-RIVD-BN, 3005-RIVD-CH, 3005-RIVD-MB, 3005-RIVD-ORB PW-93005-64TRBRN, PW-93005-64TRCP, PW-93005-64TRBM, PW-93005-64TRBRZ Tru-Temp Two Way Diverter Valve with Square Trim Model #3007-RIVD-BN, 3007-RIVD-CH, 3007-RIVD-MB, 3007-RIVD-ORB PW-93007-65TRBRN, PW-93007-65TRCP, PW-93007-65TRBM, PW-93007-65TRBRZ
PAGE 2
Tru-Temp Two Way Diverter Valve Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
PAGE 3
Parts Legend 1. 2. 3. 4. 5. 6. 7. Valve Handle Set Screw Cover Diverter Body Diverter Threaded Pin Diverter Handle Trim Plate 8. 9. 10. 11. 12. 13. 14. O-ring.......................(2) Plaster Guard Screw........................(4) Trim Nut Cartridge Cover Nut Gasket Diverter Trim Sleeve 15. Diverter Cap 16. Valve Trim Sleeve 17. Diverter Cartridge 18. Pressure Balance Valve Cartridge 19. Valve Body 20. Tub Spout Cap 21.
PAGE 4
2 in. 49 mm 3005 0.7 in. 6 in. - 152 mm 16.8 mm 0.4 in. 10 mm 1 in. 30 mm min Dimensions 0.9 in. - 23.5 mm 2.75 in. 70 mm 8 in. - 203 mm max 2 in. 50 mm 0.8 in. - 21.5 mm 6.7 in. 170 mm 2 in. - 49 mm 3007 0.7 in. 16.8 mm 1 in. 23.5 mm 1.2 in. 30 mm 2.8 in. - 71 mm 4.2 in. - 105.5 mm max 0.4 in. 10 mm 8 in. - 199 mm 0.9 in. 22 mm 2 in.
PAGE 5
Installation Instructions BEFORE YOU BEGIN Measure the following to ensure your valve will fit properly. 1 Confirm the installation position and remove the plaster guard (9). 2b If no tub, keep the tub spout cap (20). Apply plumbers tape on all joint threads needed. If welding, plumbers tape is not necessary. 2a If there is a bath tub, remove the tub spout cap (20). Apply plumbers tape on all joint threads needed. 3 Drill screws to stud to fix main valve body.
PAGE 6
without tub installation Installation Instructions 4 6 finished wall wall without tub installation stud trim plate with tub installation Connect the water and confirm there is no water leakage. Install trim plate (7). 7 5 finished wall finished wall Step 2 finished wall Step 1 with tub installation wall trim plate stud trim plate Install diverter trim sleeve (14) and valve trim sleeve (16). Screw in trim nut (11).
PAGE 7
Installation Instructions OPERATION: VALVE FUNCTIONS: DIVERTER FUNCTIONS: Showerhead Showerhead Showerhead Showerhead water ON water ON Turning valve ON, liftwater valveON handle up. Diverter handle facing up for showerhead. water ON Hand Shower Hand Shower Hand Shower Hand Shower Hot Hot Cold Cold Hot Cold Hot Cold While ON, turn valve handle to the left for HOT and right for COLD. Diverter handle facing to the right for hand shower.
PAGE 8
Usage Care and Maintenance Diverter valve controls the showerhead and handshower. Refer to drawings on "OPERATION" step. To keep your valve looking new, wipe down after each use with a soft cotton cloth. Always turn cold water on first to help prevent any accidental burning or scalding; especially for children and elderly. Protect your valve from hard water stains and mineral deposits by periodically using an auto spray wax. DO NOT use any part of the valve as a support device.