Installation Manual

6
Step 1
Step 2
Step 1
Step 2
Step 1
Step 2
Step 1
Step 2
Step 1
Step 2
Step 1
Step 2
Step 1
Step 2
Step 1
Step 2
7
6
8
9
10
11
CAUTION: Live Plumbing
Use level to assure shower pipe is straight. Mark desired
location for bottom mount.
Drill-less option: Remove covering adhesive tape (14) and
stick to wall. Hold for 30 seconds and let sit for 24 hours
before use, to properly secure. Drill option: Center mount
into the outline. Secure wall mount (13) with screws (15).
Step 1: Slide escutcheon (3) onto bottom mount.
Step 2: Unscrew set screw (4).
Step 1: Slide diverter body (21) onto wall mount (13).
Step 2: Tighten set screw (4). Slide escutcheon(3) back
to cover set screw (4).
Step 1: Slide escutcheon (3) onto Top T (5).
Step 2: Connect Top T (5) with inlet tting (2).
Step 1: Secure set screws (4) to the side of Top T (5).
Step 2: Slide escutcheon (3) back to cover set screws (4).
Installation Instructions
Drill-less option