LA MESA La Mesa ShowerSpa Model #7007 Owner’s Manual
La Mesa ShowerSpa Model #7007 Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation.
Product Dimensions 18.31 in 465 mm 16.93 in 430 mm 51.97 in 1320 mm 58.46 in 1485 mm 3.94 in 100 mm 7.87 in 200 mm 5.75 in 146 mm 7.87 in 200 mm 16.54 in 420 mm 8.27 in 210 mm 3.4 in 90 mm 7.09 in 180 mm 11.02 in 280 mm 2.58 in 65.
Parts Legend 16 16 16 1. ShowerSpa 2. Shower Head 3. Shower Arm 4. Shower Arm Insert 5. Hand Shower Holder Mount 6. Hand Shower 7. Hand Shower Holder 8. Set Screw 9. Hand Shower Hose 10. Hand Shower Mount Screw 11. Hand Shower Mount Anchor 12. Rubber Washer ..................3 13. Wall Mount Bracket...........2 14. Wall Mount Screw .............4 15. Wall Mount Anchor............4 16. 2.5gpm restrictor.................
Assembly After unpacking your ShowerSpa, some assembly is required prior to installation. Shower Arm Assembly 1. Thread shower arm (3) into shower arm insert (4) completely. NOTE: Shower arm should pivot side-to-side. 2. Insert rubber washer (12) in shower head (2) and tighten shower head onto show arm (3). Hand Shower Holder Assembly 1. Mark preferred mounting location of hand shower holder (7). Drill ¼" hole into wall surface (CAUTION: LIVE PLUMBING) for hand shower mount anchor (11). 2.
Retrofit–Existing Shower Replacement NOTE—In a remodel in which you are not replacing the finished wall surface (tile, or backing material) it is advisable to purchase a PULSE ShowerSpa model that covers the location of your existing valve assembly—either single handle or two-handle type. If your PULSE ShowerSpa model does not cover this area, you will need to either choose another PULSE ShowerSpa model that does or make necessary repairs with appropriate materials (i.e. wallboard, tile, fiberglass, etc).
Usage Pressure Balance Mixing Valve This ShowerSpa is equipped with a cUPC® pressure balance mixing valve to adjust water flow and temperature. The valve automatically adjusts to changes in water pressure (i.e. someone flushes a toilet), keeping your temperature constant and preventing accidental scalding. To turn on the ShowerSpa simply raise the handle until the desired flow rate is achieved. Rotate counter-clockwise to decrease temperature and rotate clockwise to increase temperature.
Manufacturer’s Lifetime Limited Warranty 1. Defects Covered; Warranty Period. Pulse Shower Spas, Inc. (“Pulse”) warrants to the original consumer purchaser who purchases this shower spa (the “Product”) for use in his or her own home, that the Product will be free from defects in material and manufacturing workmanship for as long as the original consumer purchaser owns that same home.
