Installation Instructions
7
Usage
Pressure Balance Mixing Valve
This ShowerSpa is equipped with a cUPC® pressure balance mixing valve to adjust water ow and
temperature. The valve automatically adjusts to changes in water pressure (i.e. someone ushes a toilet),
keeping your temperature constant and preventing accidental scalding. To turn on the ShowerSpa simply
raise the handle until the desired ow rate is achieved. Rotate counter-clockwise to decrease temperature and
rotate clockwise to increase temperature. Be sure that the handle is in the OFF position when you are done
using your ShowerSpa so that pressure does not build up inside the unit.
Brass Diverter
The Four-way Simple Select™ diverter eortlessly selects your desired function. Simply rotate the diverter
knob either direction to select functions—shower head, hand shower, body jets, or tub spout.
Hand Shower
The ve-function hand shower, equipped with a 1.5M - 1.8M stainless steel stretch hose, has a large design
that delivers easy function selection by twisting the face.
Body Jets
There are six single-function brass Silk Spray Jets™ that provide soothing spray. You can adjust the angle
of spray by pushing on the front edge of the jet in any direction. Jet face easily disassembles for cleaning
ensuring peak performance.
Care and Maintenance
To protect the nish of your copper ShowerSpa avoid using abrasive cleaners. No coarse, acidic, or alcohol-
based cleaners should be used, and no steel wool, scouring pads, or wire brushes as they may scratch copper
surfaces. Clean with hot soapy water and scrub with a soft nylon brush. For tough stains try using a paste of
baking soda and water applied with a sponge. Rinse thoroughly and dry with a soft cloth. If the surface of your
ShowerSpa discolors, it will start to darken again with use. This darkening process time will depend on how
much use the ShowerSpa gets. The more the ShowerSpa is used, the faster the darkening process.
The natural patina process may also be aected by mineral content in your water supply. We recommend
removing any standing water with a soft cloth to prevent calcium staining and mineral buildup.
Our copper ShowerSpas are crafted from the nest quality copper available. The patinas will change over time,
developing more interest and variations. A copper nish is a living nish and never really stops changing color.
You can greatly reduce this change with the use of auto wax and/or furniture oil such as Pledge Lemon Oil.
Auto wax should only be used a few times a year but you can use Pledge Lemon Oil as often as you like.
Please be aware that our copper ShowerSpa has a nish that is by nature uneven with a variance in color and
pattern. Additionally, the dimensions and consistency of shape can vary considerably. We oer this ShowerSpa
with the view that these variations are not defects, but part of the rustic character and charm of the style.
REMEMBER
Never use any abrasives or harsh cleaners!
Clean with mild soap and water ONLY!
To keep your ShowerSpa in pristine condition,
DRY AFTER EACH USE!