Product Brochure

ManualsBrandsPULSE Showerspas ManualsBath12.6 in. W x 24.5 in. H x 4 in. D Stainless Steel Double Shelf Recessed Shower Niche in Matte Black

Niche

Model #NI-1212-MB, NI-1212-SSB

PW-91212-83NIBM, PW-91212-83NIBSS

Model #NI-1224-MB, NI-1224-SSB

PW-91224-85NIBM, PW-91224-85NIBSS

Model #NI-1236-MB, NI-1236-SSB

PW-91236-87NIBM, PW-91236-87NIBSS

Model #NI-1216-MB, NI-1216-SSB

PW-91216-84NIBM, PW-91216-84NIBSS

Model #NI-1224V-MB, NI-1224V-SSB

PW-91224V-86NIBM, PW-91224V-86NIBSS

Model #NI-1248-MB, NI-1248-SSB

PW-91248-88NIBM, PW-91248-88NIBSS

Summary of content (8 pages)

PAGE 1
Niche Model #NI-1212-MB, NI-1212-SSB PW-91212-83NIBM, PW-91212-83NIBSS Model #NI-1216-MB, NI-1216-SSB PW-91216-84NIBM, PW-91216-84NIBSS Model #NI-1224-MB, NI-1224-SSB PW-91224-85NIBM, PW-91224-85NIBSS Model #NI-1224V-MB, NI-1224V-SSB PW-91224V-86NIBM, PW-91224V-86NIBSS Model #NI-1236-MB, NI-1236-SSB PW-91236-87NIBM, PW-91236-87NIBSS Model #NI-1248-MB, NI-1248-SSB PW-91248-88NIBM, PW-91248-88NIBSS
PAGE 2
Niche Please Read The Following Instructions COMPLETELY Before Beginning! Our goal is to ensure your installation goes smoothly and safely. Please read these instructions carefully and follow recommendations for plumbing and mounting. After reading instructions, if you determine you do not have the necessary skills and/or tools, we recommend that a licensed plumbing contractor complete the installation. If you encounter any problems during installation PLEASE VISIT CUSTOMER SUPPORT AT WWW.PULSESHOWERSPAS.
PAGE 3
Dimensions NI-1212 NI-1216 12.6 in. 11.8 in. 16.5 in. 12.6 in. 11.8 in. 12.6 in. 11.8 in. 15.7 in. 4 in. 0.24 in. 4 in. 0.24 in. NI-1224 NI-1224V 24.4 in. 24.4 in. 23.6 in. 23.6 in. 12.6 in. 11.7 in. 3.5 in. 0.24 in. 4 in. 4 in. 0.24 in. 11.7 in. 11.8 in. 12.6 in. 11.8 in. 0.12 in.
PAGE 4
Dimensions NI-1236 36.2 in. 4 in. 12.6 in. 11.8 in. 35.4 in. 0.24 in. NI-1248 48 in. 4 in. 4 12.6 in. 11.8 in. 47.2 in. 0.24 in.
PAGE 5
Installation Instructions BEFORE YOU BEGIN Measure the following to ensure your niche will fit properly. 1 2 Prepare an opening between the uprights according to the dimensions X and Y of your niche, minus 1/4" (6mm). Ideally, when you insert your niche, it should offer a little resistance in the drywall to prevent it from moving until the silicone dries completely. If you have added another ceramic style finish, make it finish slightly shorter than the drywall.
PAGE 6
Installation Instructions 3 You will need to install wall supports all around the niche (A) in order to support it adequately. 6 4 Generously apply silicone on all sides, on the inner surface of the edge of the niche, on the wall, and on the uprights (as illustrated) for optimal sealing support.
PAGE 7
Installation Instructions 3 Place the niche against the wall and press firmly. Remove the niche and add silicone if it does protrude slightly. 4 With a wet finger, wipe off any excess silicone.
PAGE 8
Usage Care and Maintenance Make sure to measure your niche model, as all models have different dimesions. To keep your niche looking new, wipe down after each use with a soft cotton cloth. Allow silicone to dry completely before wetting. Protect your niche from hard water stains and mineral deposits by periodically using an auto spray wax. DO NOT use any part of the niche as a support device. Clean using mild liquid soap and a non-abrasive sponge or cloth. Rinse with clean water.