Use and Care Manual

P a r t s l i st
S i n k i n st a l l a t i on i n st r uc ti on
Prepare the required
accessories
Pass the top part of
drain through the
drain hole
Put the pot holder on
the countertop
(with plastic washer)
Align the sink with the
drain hole and set it
up
Put the rubber washer
on the drain pipe and
tighten the nut(under
countertop )
Prepare bottom
parts of drain
Contact two parts of
the drain and tighten
Finished
F aucet i nstallati on i nstr ucti on
contact hot and cold
waterlines and tighten
Put O-ring to the
pos
ition as shown
Drill the 1/4 screw
in
Pass two waterlines
through faucet hole of
countertop & adjust
faucet
Put U-rubber
pad on
Put U-metal
piece on
Put nuts on
& tighten nuts
Finished
The overall effect The overall effect
U-metal piece x1
U-Rubber pad x1
O-ring x1
screw x2
PTFE tape x1
faucet x1
bottom part drain x1upper part drain x1
hot and cold waterlines x2
plastic washer x2 pot holder x1
basin x 1
adapter 1/2 to 3/8 x 2 adapter 1/2 to 9/16 x 2