Product Manual

3
1：IMPORTANT SAFETY INSTRUCTION
IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY
AND PROPERTY DAMAGE.
READ AND UNDERSATND ALL INSTRUCTIONS BEFORE INSTALLING OR USING YOUR AIR
COMPRESSOR. KEEP THIS BOOKLET FOR FUTURE REFERENCE.
1-1：RISK OF FIRE
● DO NOT SPRAY COMBUSTIBLE OR FLAMMABLE LIQUID IN A CONFINED AREA,
SPRAY AREA MUST BE WELL VENTILATED.
● DO NOT SMOKE WHILE SPRAYING OR SPRAY WHERE SPARK OR FLAME IS
PRESENT.
● KEEP COMPRESSOR AT LEAST 12 ~ 18 INCHES AWAY FROM SPRAYING AREA
AND ALL EXPLOSIVE VAPORS.
1-2：RISK OF ELECTRICAL SHOCK
● DISCONNECT COMPRESSOR FROM ELECTRICAL SUPPLY CIRCUIT BEFORE
MAINTENANCE.
● DO NOT EXPOSE COMPRESSOR TO RAIN OR OPERATE IN A WET AREA.
● NEVER USE THE AIR COMPRESSOR WITHOUT CONNECTION TO A PROPERLY
GROUNDED OUTLET WITH THE SPECIFIED VOLTAGE AND FUSE PROTECTION.
● IMPROPER GROUNDING CAN RESULT IN ELECTRICAL SHOCK.
1-3：RISK OF EXPLOSION
● DRAIN TANK DAILY, CONDENSED WATER WILL CAUSE RUSTING AND RISK OF
TANK RUPTURE OR EXPLOSION.
● DO NOT REPAIR、MODIFY OR WELD TANK, RETURN TO AUTHORIZED SERVICE
CENTER IF REPLACEMENT IS REQUIRED.
● DO NOT ADJUST REGULATOR TO RESULT IN OUTPUT PRESSURE GREATER
THAN MARKED MAX. PRESSURE OF ATTACHMENT.
● PRESSURE SWITCH IS SET AT THE FACTORY FOR OPTIMUM PERFORMANCE OF
YOUR PARTICULAR MODEL, NEVER BYPASS OR REMOVE PRESSURE SWITCH AS
SERIOUS DAMAGE TO EQUIPMENT OR PERSONAL INJURY COULD RESULT FROM
IMPROPER PRESSURE SETTING.
● BEFORE STARTING COMPRESSOR, PULL PRESSURE RELIEF VALVE RING TO
MAKE SURE THE VALVE MOVES FREELY. THE PRESSURE RELIEF VALVE IS
FACTORY INSTALLED TO PREVENT THE AIR RECEIVER FROM DAMAGE SHOULD
MALFUNCTION OCCUR IN THE PRESSURE SWITCH. IT IS FACTORY SET AT A
SPECIFIC LIMIT FOR YOUR PARTICULAR MODEL. AND SHOULD NEVER BE
TAMPERED WITH. ADJUSTMENT BY USER WILL AUTOMATICALLY VOID
WARRANTY.