ASSEMBLY 350U with regulator Manual

5
Pumptec, Inc. | 700 McKinley St. NW, Anoka, MN 55303 | 763-433-0303 | www.pumptec.com Version 011614
- Your tank needs to have a ¾” or larger feed port and a ¾” or larger bypass
return port.
- Install 3/4” NPT bulk-head fittings into your tank if either or both ports are
not present.
- Also install ¾” hose-barb fittings into each bulk-head fitting.
- Locate the bypass return port at least 12 inches away from the suction port.
The bypass return port can be located above or below the liquid level.
- Take extra care securing your tank with suitable straps and/or supports that
keep the tank from shifting during transport.
STEP 3
Prepare tank.
¾” feed port
¾” bypass
return port
At least 12”