ASSEMBLY 350U with regulator Manual

6
Pumptec, Inc. | 700 McKinley St. NW, Anoka, MN 55303 | 763-433-0303 | www.pumptec.com Version 011614
¾” hose
- Connect a ¾” hose from one of the the
regulator ports marked “bypass” to the
bypass return port on your tank.
- Connect a ¾” suction line from the pump
inlet shut off valve to the feed port on
your tank. This hose should be reinforced
flexible suction line that does not collapse
under a vacuum. Maximum distance
from tank to pump is 6 ft.
- Connect a ½” hose from the pump
discharge barb to your hose reel or
directly to your spray gun.
- Secure all hose ends with hose clamps to
ensure no leaks.
¾” suction line
1/2”
discharge
hose
STEP 4
Connect feed, bypass, and discharge hoses.