Installation Guide

How do I create special effects with my painting (faux finishing)?
Since 1949, Symphony by Purdy has established itself as a leading manufacturer of special
effect tools. Faux finishing painting techniques are used to create unique finishes including
stippling, stenciling, sponging, dragging, color washing, veining, softening and spattering.
If you have questions about desired faux finishes, painting techniques or faux finishing tools,
please contact us.
When can I clean my painted walls?
Normally, wait at least two weeks before cleaning to give the paint time to cure. Some
manufacturers require 30 days, so be sure to read the directions on the paint you are using.
What's the best way to touch up paint?
To achieve acceptable touch-up results, it's important to apply touch-up paint using the
same painting technique as the original application, if possible, to avoid having any
difference in sheen or texture. Be sure to use paint from the original batch and under similar
temperature and humidity conditions, as well.
Repair the defects first. Then scuff sand the area around the patched area and apply a
drywall primer.
For painting, apply a thin coat, reducing some of the original paint by about 25 percent.
Then apply the paint to the center of the patched area, using the original application
method, and work it away from the patch.
By feathering the touch-up out from the patch, the difference in film build and appearance
should be minimal, since you will be blending it into the surrounding areas. If the repaired
areas are still noticeable, you may have to paint the entire wall.