Installation Guide

Furthermore, 100 percent nylon filament allows the paint to release from the brush easier
and flow more smoothly onto the working surface.
It is worth mentioning that Purdy synthetic filament paint brushes also perform exceedingly
well in oil-based paints. This is due to the various processing and finishing steps in our
manufacturing operation that soften the synthetic material and eliminate drag when used
with oil-based paints.
To select a specific brush or roller for your application, visit our Painting Tool Selector.
Which paint roller is the best choice for various types of paints?
Most people believe that all paint rollers look and feel similar, but it's important to keep the
following painting tips in mind to achieve professional painting results:
 Woven roller cover - Paint rollers that are made of woven material, such as the
Purdy White Dove™ roller cover, are virtually shed-free because they are made
out of continuous yarn. Every thread that makes up the face fabric is locked to
the back of the fabric. These roller covers are recommended for smooth surfaces
such as doors, paneling and smooth walls.
 Knitted roller cover - Paint rollers that are made out of knitted material are usually
used for rough or semi-rough surfaces, such as rough-cut siding, stucco or
textured walls and ceilings. We recommend the Purdy Golden Eagle™ paint
roller. This roller cover contains a high-density material that will hold a lot of paint
without dripping.
 Selecting the pile (or nap) - The more texture desired, the higher the pile should
be. A 1/2-inch plus pile height is ideal for a stippled effect common to most
homes. Pile heights on some Purdy textured paint roller covers are as high as 1-
1/4 inches, creating an extremely textured effect. Conversely, if you desire a
smooth finish in your kitchen, bath or utility room, use low-pile 1/4-inch to 3/8-inch
roller covers such as the White Dove and Parrot™ paint roller covers.
Painting tips for cutting in with Purdy brushes.
"Cutting in" is the art of drawing a straight line, separating two colors using only the paint
brush - no masking tape or other aid. You often see it at the edge where a wall color is cut
into a different ceiling color. When cutting in, follow these simple rules:
 Use a fully loaded brush.
 Using the brush parallel to the area to be cut, let the paint brush open up into a
semi-oval and bring it into the line you are cutting. Follow the line until the line of
paint begins to break up. Repeat. It is best to cut in while breathing out or
holding your breath.
 Work into the previous area.
When can I apply the next coat of paint?
Generally, a second coat of paint should be applied at least two hours following
application of the previous coat. However, if it is humid or you are using a heavily tinted
paint, it can take longer.