Use and Care Manual

ASSEMBLY INSTRUCTIONS
STEP 5:
Parts:
Part 4 (x6) - Leg
Screw on all Legs (4) into their
respective places on the frame. You
will have 6 total legs once complete.
Flip the frame over and your
trampoline is ready for use if you do
not want to utilize the handrail.
If you do want to install the handrail,
continue to step 6 below.
STEP 6:
Parts:
Part 7 (x1) - Left Side Rail Base
Part 8 (x1) - Right Side Rail Base
Remove leg caps from legs you will use
to add the handrail. Keep one leg in
between for correct location.
Slide both Left Side Rail Base (7) and
Right Side Rail Base (8) to their
respective Legs making sire the push
pin holes are facing outward.
4
7
8
9
MODEL# 9005BTH