0.8V Li-ION Charger Original Instructions Read instructions before operating this tool.
PURE 10.8V Battery Charger EC - DECLARATION OF CONFORMITY TABLE OF CONTENTS We, the importer Evolution Power Tools Ltd.
10.8V Li-ION Charger IMPORTANT Please read these operating and safety instructions carefully and completely. For your own safety, before using this equipment check that the voltage is correct and that all handles and parts are firmly secured. If you are uncertain about any aspect of using this equipment, please contact our Technical Helpline. Technical Helpline UK 0870 609 2297 Technical Helpline USA 1-866-EVO-TOOL PURE 10.
5. Store idle tools. When not in use, tools should be stored in a dry locked-up place, out of children’s reach. 6. Never force the tools. Your tools will be more efficient and safer when used at the rate for which they were intended. 7. Use the right tool. Do not force small tools to do the job of a heavy duty tool. Do not use tools for purposes not intended; for example do not use circular saws to cut tree limbs or logs. 8. Dress properly.
10.8V Li-ION Charger 2. Use this charger only with the designated Pure rechargeable battery packs. Other types of battery may overheat and burst causing personal injury or damage. 3. Do not abuse the charger cord. Never use the cord to carry the charger. Do not pull the cord rather than the plug when disconnecting from the power supply. Replace damaged cords immediately. 4. Ensure that the power cord is routed so that it does not pose a trip hazard.
Annotated photograph of 10.8V Battery charger 1 2 3 1. MAINS LEAD 2. BATTERY DOCKING PORT 3. LED CHARGING INDICATORS 4.
10.8V Li-ION Charger SPECIFICATION PURE 10.8V BATTERY CHARGER Charger Input Charger Output Charging Time 240V ~ 50Hz 10.8 V DC 1 hour OPERATING INSTRUCTIONS WARNING This charger is designed to charge Pure 10.8V battery packs. It should only be used for this purpose. Using this charger with any other battery packs could be dangerous. CHARGING A BATTERY PACK 1. Position the charger on a work bench or similar in a well ventilated location and ensure that the charger cannot be covered by workshop cloths etc.
Note: If battery pack failure is suspected, we recommend that the operator inserts a new battery of known quality into the charger to check that the charger is working correctly. If the new battery charges correctly, then the original battery is probably defective and should be sent for safe recycling. If the new battery pack displays the same problems as the original, have the charger tested at an authorized service centre.
10.
Notes 10
10.
