Instructions / Assembly

5.2 Screw(clockwise)theTankShutoffValveonandtightenupbyhand.Donotovertighten.
5.3 ConnecttheYELLOWtubingontotheQuickFittingofTSV.
Step6:InstallReverseOsmosisMembrane


6.1 Openthemembranehousingscrewcap.First,youwill
needtodisconnectthewhite1/4”tubingfromtheInletquickfittingonthemembranehousing
cap(refertoHowtoUseQuickFittingsection  ),andthenunscrew(counterclockwise)thecap.
Athickrubberbandcanbeslippedonthehousingbodyforastrongerhandhold.
6.2 TheROmembraneispreservedinasealedbagwithdistilledwater.Removetheblackcaps
frombothendsofmembrane.Followtheflowdirectionsignonthemembrane,andfirmly
insertthemembraneintothehousing.ThesmallerendwithtwoblackOringsshouldbe
insertedfirstuntilthebackendisevenwiththehousingopening.
6.3 Beforetwistingthehousingcapbackon,checkthattheOringisplacedsecurelyonthe
membranehousing(capdoesNOThaveOring).Handtightenandthenusingasmallplastic
housingwrenchtighten1/4–1/2turns,beingcarefulnotovertighten.DONOTreconnectthe
tubingtoinletoncapatthispoint(Thisconnectionismadeinsystemstartupstep).

Step7:TubingHookup

7.1 SeetheSampleInstallationandRTW5TOPVIEW,noteconnectionpointsAB,CD,EF,
andGH.






Page9www.VenusTreasureIsland.com|(678)9004702|[e-mail] 