Instructions / Assembly

InstallationTips
HowtouseQuickConnectfitting


Toconnect:
1. Checkandcutthetubingendsquarelyandcleanlywithutilityknifeorscissors.
2. Makeamark½inchfromtheendoftubing,thismarkwillhelpguidethetubinginstallation.
3. Fullyinsertthetubinguntilthemarkisabouttodisappear.Thisensuresthatitissealedbythe
Oringnearthebottom.





Todisconnect:
1. RemovetheblueLockClip.
2. WithtwofingersPUSHINGINandPRESSINGDOWNtheLockSleevetoeliminatethe
GapthattheblueLockClipoccupied,pullthetubingout.(PressingdowntheLockSleeve
releasesthespringloadedsteelteeththatgrabthetubinginsidethefittingbody).
Page4www.VenusTreasureIsland.com|(678)9004702|[e-mail] 