PTA3 2X75 Watt Stereo Power Amplifier www.pyleaudio.
Your New Pyle Pro Amplifier gives you the power and versatility you need in a professional sound system. The amplifier's wide frequency response makes it suitable for amplifying music or vocal program material. It can be used in meeting halls, house, restaurant, schools, stores, or for paging systems. PTA3 features a PAGER-MIXING function that offers the flexibility of using it at paging or musical events. Please read this manual thoroughly before you attempt to set up and use the amplifier.
Features and controls 15 1. Power ON LED Indicator -Lights to indicate power is turned on. 2. 1/4"PHONE JACK -Accepts headphones with 1/4" plug. 3. MIC VOLUME CONTROL -Lets you adjust the volume of connected MIC to the proper setting. 4. MUSIC VOLUME CONTROL -Lets you adjust the volume of music output from the sources of AUX 1, AUX 2, OR CD. It doesn't affect the volume from MIC. 5. BALANCE CONTROL -Lets you adjust the sound balance between the left and right amplifier output. 6.
8. SWITCHABLE MIC PAGER AND MIXING MODES -Set to PAGER, allows a voice to be heard clearly through the microphone by attenuating automatically all the audio input sources. This is good to use when paging the person in office, store, or restaurant. -Set to MIXING, both of the voices from microphone and music will be existed at the same time. It is similar like playing at KARAOKE events. 9. 1/4" MIC INPUT JACK -Lets you connect a microphone with a 1/4" plug. 10.
CARING FOR YOUR PYLE PRO AMPLIFIER Your Pyle Pro Amplifier is an example of superior design and craftsmanship. The following suggestions will help you care for your amplifier so you can enjoy years of use : *Keep the amplifier dry. If it gets wet, wipe immediately. *Use the amplifier only in well-ventilated installations. *Handle the amplifier away from dust and dirt. *Wipe occasionally with a damp cloth to keep it looking new.
Connecting two 4-8 ohm speakers in stereo mode. Connecting four 8 ohm speakers in stereo mode. TROUBLE SHOOTING No power The fuse might be blown. Check the amplifier's fuse and replace it if necessary. No sound Sound source or speakers not connected properly. Check all connections. MUSIC volume control set to minimum. Adjust the volume control to desired setting. The speaker's wire might be the wrong impedance. Make sure all connected speakers have the same impedance rating.
Limited warranty All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for one (1) year from the date of purchase. This warranty is limited to the original retall purchaser of the amplifier. Should the unitfall due to factory defects in material or workmanship,your unit well be repaired or replaced at the sole discretion of PYLE.
SPECIFICATIONS Output power, 2 channels driven 4-OHM, 1 KHz, 1% THD. 4-OHM, 1 KHz, 10% THD. Peak Power 15Wx2 23Wx2 75Wx2 Total Harmonic Distortion, 1 KHz Rated Power Input Sensitivity, 1 KHz ,4-ohm Rated Power AUX 1 AUX 2 CD MIC Signal to Noise Ratio, 1 KHz, 4-ohm Rated Power AUX 1 AUX 2 CD MIC BASS TREBLE 100Hz 10KHz 0.3% 200mV 200mV 200mV 2.