Bluetooth Stereo Amplifier/Receiver User Manual PDA6BU
PDA6BU WARNING! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE ARE NOUSER－SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN. This symbol is intended to alert the user to the presence of “dangerous” voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of Electric shock.
PDA6BU PDA6BU FRONT & BACK PANEL 1. USB / SD Card/Bluetooth Control Console: After inserting a USB flash drive / SD Card into the input terminal, be sure to set the input selector (13) to USB/SD, then press the mode button to choose between audio from the USB Port, SD Card input, Bluetooth or FM radio. If you want to use the Bluetooth, check the below steps.
PDA6BU STEPS FOR CONNECTING WITH BLUETOOTH DEVICE A. Press MODE button under the ID3 display screen and enter into bluetooth mode. B. Search on the bluetooth device and you can find the bluetooth name “ PDA6BU” C. Select the PDA6BU bluetooth name and wait for the device to pair. The screen will display “SEARCHING”. D. The PDA6BU will make a noise confirming that the devices have successfully paired and screen will display “BLUETOOTH CONNECTED” E. Once paired you can play music from your bluetooth device.
PDA6BU 3. Track / Folder Searching Knob: * Turn this knob clockwise to search through all of the tracks inside the USB flash drive / SD Card. Each track will appear by the name of the track. It will show the tracks or folders chronologically (from when the files were loaded onto the USB flash drive / SD Card. Press the knob to begin playing the desired track. First the tracks on the root file will be displayed and then the tracks that are in folders.
PDA6BU Remote control: 1. Press this button to turn on the MP3 2. When in FM mode, press this two buttons to select Previous or next station 3. Press these two buttons to select the previous Or next track in USB or SD or Bluetooth mode 4. Volume up or down 5. Press the numbers to select the tracks directly. The Unit takes 1-2 seconds to response 6. Press this button to select the different repeat mode. If press this button for more than 3 seconds, it will Go to FOLDER searching 7.
