PLMR17BTS OWNER’S MANUAL Mobile Audio System PLL Synthesizer Stereo Radio Automatic Memory Storing USB&SD/MMC Card Interface Fold Down Detachable Panel Auxiliary Input Function Bluetooth Hands-free function & A2DP (Advanced Audio Distribution Profile) Stereo Audio Transmission Smartphone(Android and IOS system) control 1
CONTENTS Installation...................................................3 SD/MMC operation................................... 11 Bluetooth operation .................................. 12 Preparing for operation ........................ 12 DIN Front-Mount (Method A) ...................3 Installing the unit....................................3 Removing the unit .................................4 ISO connection ..........................................7 Pairing ............................................
INSTALLATION Notes: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
INSTALLATION back of the unit in place. Use the supplied hardware (Hex Nut (M5mm) and Spring Washer) to attach one end of the strap to the mounting bolt on the back of the unit. If necessary, bend the metal strap to fit your vehicle’s mounting area. Then use the supplied hardware (Tapping Screw (5x25mm) and Plain Washer) to attach the other end of metal strap to a solid metal part of the vehicle under the dashboard. This strap also helps ensure proper electrical grounding of the unit.
INSTALLATION front panel. 4. Lift the top of the outer trim ring then pull it out to remove it. 5. Insert both of the supplied keys into the slots at the middle left and right sides of the unit, then pull the unit out of the dashboard. To fasten the unit to the factory radio mounting brackets. Align the screw holes on the bracket with the screw holes on the unit, and then tighten the screws (5x5mm) on each side. Note: the outer trim ring, sleeve and the metal strap are not used for method B installation.
USING THE DETACHABLE FRONT PANEL REMOVING THE FRONT PANEL Precautions when handling 1. Press the release button ( ) on the front panel and pull off the front panel. 1. Do not drop the front panel. 2. Do not put pressure on the display or control buttons when removing or installing the front panel. 3. Do not touch the contacts on the front panel or on the main unit body. It may result in poor electrical contact. 4.
WIRING CONNECTION ISO CONNECTION 7
OPERATION LOCATION OF KEYS 1. MODE 2. (release button) 3. (hang up)/LOU/BND 4. VOL / SEL/MENU (Audio knob) 5. 6. MUTE 7.LCD 8. 4 RDM 9. 5 DIR10.1PAU 11.2 INT 12.3 RPT 13. AUX IN 14. 6 DIR+ 15. .USB interface 16 .9 LOC 17. SCAN/# 18.0 DSP 19.*/+/ AS/PS 20.8 EQ 21.7 MON 22.T-MENU/TRANS 23. 24. (pick up) 25. Reset button 26. SD/MMC interface 27.Mic 28.
OPERATION BASIC OPERATION the unit working mode: Radio, USB, CARD, IPOD (optional), AUX and BT Audio. SWITCHING ON/OFF THE UNIT Press button (6) to turn on the unit. When the unit is on, press and hold button (6) to turn the unit off. FACEPLATE RELEASE Press button (2) to removable faceplate. detach SYSTEM SETTING Long press the SEL button (4) on the front panel to enter SYSTEM SETTING mode. There are below items to adjust.
OPERATION equalization function and to select desired audio mode. There are five kinds of mode as below: SCAN Press SCAN button (17) to enter scan mode, the unit will scan all the frequency rang and keep on each station for several seconds (the corresponding frequency will flash 5 times on LCD). →FLAT→CL AS→POP M→ROCK→EQ OFF AUXILIARY INPUT The unit can be connected to a portable audio player through the AUX IN jack (13) on the front panel.
OPERATION press it again will exit this mode. USB interface (15). You can connect an USB driver through this interface (15). When you connect an USB driver through the interface, the unit will search the MP3 files or WMA files in the USB driver and start to play MP3 files or WMA files automatically. If in other mode, you can also press MOD button (1) to select USB mode. Note： The main unit can only support the standard USB-memory disc which is approved by Microsoft.
OPERATION device or SD card. Do not connect it to the main unit to play. Because any wrong operation may cause files loss. 4) If you turn off the mobile phone that has paired with the unit, when you turn on the mobile phone, you need to reconnection. BLUETOOTH OPERATION PREPAIR FOR OPERATION BLUETOOTH When successful paired, shortly press T-MENU button (22) on the front panel will enter the telephone menu, keep pressing this button or press / button (23/5) to change the items in this menu.
OPERATION you set TALK to 20. The main volume will set to 100 automatically when a call is coming. Example: TALK volume MAIN volume 00 = 60 01 = 62 02 = 64 …………………….. 20 = 100 1) If you transfer the call to mobile phone, the mute of the present mode will be released at the same time. 2) When making an outgoing call, it’s not possible to transfer if the call is not being answered yet. AUDIO (A2DP The unit supports Bluetooth audio function.
OPERATION 4. If you first time open the radio view, please tap the Menu key on your smartphone, and choose to connect a device as promotion, then scan for the BT devices. 5. Connect the smartphone and unit BT device named EP-BT. 6. When the BT connecting is established, you are ready to using the Apps and the unit LCD will displaying controlled by smartphone all the times until you shut down the radio view Apps.
OPERATION settings： ，enter into the USB mode： Click Click ， entre into the tunner settings： If no USB, all the icons will be in grey and can’t be touch.
OPERATION If no SD, all the icons will be in grey and can’t be touch. --/ ，enter into the Bluetooth Click A2DP interface as follow： ------- Click mode: ， enter into the AUX IN :Song name / :the previous or next song --- the current process status of the playing / ---Time have already played / The total time of the song Click If no device, such as USB,SD,CD deck found in the unit, the correspond icons on the Apps interface will be in grey and can’t be touchable.
REMOTE CONTROL HANDSET(OPTIONAL) FUNCTION KEY & CONTROL 11. POWER 12. MODE 13. TUNE/SKIP 14. 15. 16. 17. 18. 19. Power ON/OFF Button Mode Button (S,T,U,7,For MP3/WMA Operation) (8) 7/BND SCN PAU SHF DIR▼ VOL▲ 20. SEL (LOU/ENT) 21.
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions Tone Controls - Bass (at 100 Hz) - Treble (at 10 kHz) : 178 (W) x 107 (D) x 50 (H) : ±10 dB : ±10 dB Maximum Output Power : 4x60watts Current Drain : 15 Ampere (max.) RADIO (U.S.A) FM Frequency Coverage IF Sensitivity (S/N=30dB) 87.5~108 MHz 10.
TROUBLE SHOOTING Before going through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer. Symptom No power Cause Solution The car ignition switch is not on. If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Temperature inside the car is too high.
