User Manual
www.PyleUSA.com
12
• A wireless network can experience interference from other devices that use the 2.4 GHz frequency
(wireless phone, BT device, or microwave oven). Although interference can also happen when using the
5 GHz frequency, it is less likely to occur.
• The wireless environment can make wireless network service run slowly.
• Failure to turn o all local home networks may cause excessive trac on some devices.
• The access point device must support wireless connections and wireless connection feature must be
enabled on the device to have AP (access point) connection. Contact the service provider for availability
of wireless connections on the access point.
• Check SSID and security settings of the AP. Refer to the appropriate documentation for SSID and security
settings of the AP.
• Invalid settings of network devices (wired/wireless line sharer, hub) can cause the TV to operate slowly or
not operate properly. Install the devices correctly according to the appropriate manual and network.
• The connection method may dier depending on the AP manufacturer.
• To solve a problem related to this function, refer to the Troubleshooting section of User Guide.
HOW TO OPERATE TV
Pairing the Magic Remote
LEARN MORE ABOUT MAGIC REMOTE
You can select the functions you want easily and conveniently by moving and clicking the cursor on the
TV screen, just as you would use a mouse on a computer screen.
• You can purchase the Magic Remote separately if it is not provided.
PAIRING THE MAGIC REMOTE
You must pair the Magic Remote with the webOS TV to use it. Pair the Magic Remote prior to use as
follows:
1. Turn on the TV. After about 20 seconds, point the remote towards the TV and then press the Wheel (OK).
2. The remote control will automatically be registered, and the pairing completion message is displayed
on the TV screen.
• If the Magic Remote failed to register, turn the TV o and then on again, and then try to register again.
RE-REGISTERING THE MAGIC REMOTE
If the Magic Remote's pointer does not appear on the TV, you must re-register it.
1. Hold the remote control towards the TV and press and hold GUIDE button until the instruction appears.
2. The previously registered remote control is deregistered and then registered again.
USING THE MAGIC REMOTE
1. If you shake the Magic Remote left and right or turn its wheel while pointing it at the TV, a pointer will
appear on the TV screen.
If you move the remote control to the direction you want, the pointer follows the movement.
2. Move the pointer to the location you want and press the Wheel (OK) button to execute the function.