User Manual

www.PyleUSA.com
14
CAUTIONS FOR SPEECH RECOGNITION
Voice recognition requires a Magic Remote, which may not be supported by certain models.
To use all speech recognition features, you need to set your programmes, region, etc.
Otherwise, you cannot use some features.
You must have a network connection to use the speech recognition feature.
If you have a network connection, you need to accept the terms and conditions to use speech recognition.
To control the set top box connected to the TV with the voice recognition feature, go to
Connection Device Connection Settings Universal Control Settings to set up a universal remote
control.
It is recommended to point Magic Remote toward the set top box after the voice input.
The rate of speech recognition may vary depending on the characteristics of the user (voice volume,
pronunciation, accent, and talking speed) and the surroundings (noise and TV volume).
To achieve accurate recognition of your speech, you must pronounce words in a slow and accurate
manner at an appropriate voice volume at a distance of about 10 cm away from the Magic Remote's
microphone.
If your speech is not recognised properly, speech recognition may operate dierently than you originally
intended.
Speech To Text
USING SPEECH TO TEXT
You can enter text in text elds using the speech recognition function.
Select the button on the keyboard screen to switch to speech input mode. Some models may not be
supported.
1. Move the Magic Remote pointer in the text box to open the virtual keyboard.
2. Press the button on the virtual keyboard.
3. After the voice recognition information window opens as shown below, speak into the microphone on
the remote control slowly and clearly.
4. If there are words similar to that which you spoke out loud, you may see a list of multiple results as shown
below. If you do not get the results you want, press RETRY to try again. Select a result and it will be
displayed on the text box.
ENGLISH
# $%
Aa
En te r
Clear all
peak to enter text (
e to change la