User's Manual

3 – FVIC Configuration and Monitoring Features
D000003-006 Rev. A 3-33
Q
Monitors port synchronization loss. Indicates the number of times the
signal from the FVIC Fibre Channel port to the FC fabric was not of
sufficient quality to support synchronization with the incoming data stream.
❥ Invalid Transmission Count
Monitors port invalid transmissions. Indicates the number of invalid
transmissions received. The counter is created at boot time and increments
as long as the FVIC is running.
❥ Invalid CRC Count
Monitors port Cyclic Redundancy Check errors. Indicates the number of
times that a CRC error occurs.
❥ Link Status
Monitors the status of the port link state. Indicates whether the port is up
or down.
3.3.10
Fibre Channel Trap Control
Figure 3-53. Fibre Channel Trap Control Submenu
The FC Trap Control screen allows the user to set default trap scenarios related to
FVIC line card.
To set Fibre Channel traps:
1. Click FVIC.
2. Click Trap Control.