User's Manual

4 – EVIC Configuration and Monitoring Features
D000003-006 Rev. A 4-3
Q
4.1.1
Set Level
Figure 4-5. Set Level Button
The Set Level button allows the user to set log level configuration parameters for
all software modules on the EVIC.
To set log levels:
1. From the menu, select Logging.
2. From Logging, select Set Level. The Log System Configurator (Device Tab)
window is displayed:
Figure 4-6. Log System Configurator (Device Tab)
The Device tab presents current log level configuration settings for the following
software modules:
❥ RAM = The circular log buffer contained in memory. To access the contents
of this buffer, use the Chassis Viewer View Log button
❥ Syslog = All output messages are saved to the syslog host. If a log level is
ON, that type of message is sent to a syslog server. The syslog server is
defined at the switch chassis level within Syslog Host tab of the Logging/Set
Level submenu.