User's Manual

4 – EVIC Configuration and Monitoring Features
Configuration
4-26 D000003-006 Rev. A
Q
Actor ID
This field is set by the EVIC firmware. A remote Ethernet switch uses the
combination of Actor ID and Actor Key to uniquely-define an aggregation..
This field is view only.
Partner Port
This field is significant for only the ports having LACP Enabled. For those
ports, this indicates the the port number of the remote switch at the opposite
end of the Ethernet cable. This field is view only.
Partner Key
This field is significant for only the ports having LACP Enabled. For those
ports, this indicates the partner key for the aggregation of the remote switch
at the opposite end of the Ethernet cable. This field is view only.
Partner ID
This field is significant for only the ports having LACP Enabled. For those
ports, this indicates the partner ID for the aggregation of the remote switch at
the opposite end of the Ethernet cable. This field is view only.
4.3.7
Maximum Packet Age
Maximum Packet Age allows the user to view and/or set the maximum packet age
value (in milliseconds).
Figure 4-34. Maximum Packet Age
1. From Menu, select Configuration.
2. Select Max Packet Age. The Maximum Packet Age window is displayed:
Figure 4-35. Maximum Packet Age Window
3. To change the maximum packet age, click in the Current text box and enter
the new value (default equals 65,000 milliseconds).